Steve just saw your response to Albert .I had thought  I would have to remove the pedal box in order not to kink the ...   06-06-2008 02:05 am

Steve Have you been able to work this out yet ? My only thought on this is that maybe the clutch fork pins are ...   06-06-2008 01:54 am

I just rediscovered the old Message archive ,and found that the locationI chose to twist  ,between the dizzy pulley and Intake was not ...   05-11-2008 11:10 pm

I have my 73 MkI  back on the road (almost) ! I have changed the timing belt sevearl times over the years ,but with out a ...   05-11-2008 10:50 pm

I bought  the car in around 1980 .I was  trying to find a TR6 that wasn't too rusted out at the time and ran ...   04-28-2008 02:38 am

Dave here is a pic of my setup ...   04-27-2008 10:56 pm

    Dave the upper hose connects to the back of the air filters assumming you have the after market twin filter units I'm north ...   04-27-2008 10:51 pm

Its' not particularily cold in Toronto in the summer .....but with striaght 20w 50 dino  oil the tranny was sticky until it warmed up ...   04-17-2008 03:07 am

I have just had the engine rebuilt and am now in the midst of re-installing everything ! I had used a blend of 20w50 and ATF ...   04-16-2008 03:00 am

Judson That sounds like a good workout for the front brakes ! I am generally pretty frugal but I am not against using the ...   03-04-2008 01:35 am

    Judson In 2005 you were working on a setup to rep[lace the original JH disc with 10" Celica  disks . Were you ever ...   02-28-2008 01:27 am

Mark Just wanted to thank you for your assistance changing my M/C . Thanks to your  very informative description ,my job went very well ...   05-22-2006 02:23 am

Well the Yeas have it .I will install it this weekend ! This particular M/C did  come marked as original Lucas /Girling /Trw  not that any ...   05-18-2006 02:13 am

Ron I am in the process of changing my M/C and purcahes a new unit from Obsolete Automotive There is what looks to me to ...   05-17-2006 02:32 am