Thanks all! I got two, 800lb., ratchet straps that I was planning to cris-cross at the rear. I wanted to put them outside of the ...   09-01-2023 03:16 am

Hello JHPS I'm planning a trip up to the SVRA race at Watkins Glen next week. I'll be driving up on Wednesday morning to Ithaca ...   08-30-2023 03:48 am

Thanks! When I was doing my fuel pump research, I was very concerned about fire and bowl overflow because of an over-spec'd pump (found the info ...   07-01-2023 02:22 am

Thanks everyone for the replies. I ended up going with the Facet 40104 and put a fuel pressure gauge at the carbs. I'm seeing a constant ...   06-18-2023 01:08 pm

Paul Koehler wrote: The cube on my ride is the 1.5 to 4g/m unit. Try out the search function......there is usually someone who has been there & ...   06-18-2023 01:07 pm

Paul Koehler wrote: A Facet cube F/P was installed ( on the side of the hgwy.,because the SU STB ) about 18 yrs ago, and has ...   06-14-2023 04:08 am

Hi everyone I've got an SU fuel pump that seems like it's limping. I'd like to convert to a solid state fuel pump, but understand the ...   06-13-2023 07:09 pm

landweer wrote: does anyone have another copy of these instructions? Maybe in a word document format or PDF? I can't read this one. ...   05-24-2023 01:57 am

Not mine but looks like an interesting project for someone with the talent and desire https://motorsportsmarket.com/racecars/1966-lotus-41-formula-b-2-barn-find/ ...   12-21-2022 05:47 pm

Has anyone converted to these headlights from Delta? Thanks, Mark ...   11-18-2022 03:30 pm

I asked the seller and he let me know that it came from Lind Bros. ...   09-22-2022 05:23 pm

Here's the link: https://bringatrailer.com/listing/1974-jensen-healey-mark-2-roadster-30/ Nice looking example. A recent post from the seller is for a build sheet. Does anyone know where this might have come from? Mark ...   09-21-2022 11:12 pm

noomg wrote: Mark, I'd say you're right about those marks being made by a machinist or builder after the fact. The good news it probably means your ...   08-06-2022 11:36 pm

Hi - I'm wondering if anyone on this forum recognizes these markings on the block - Not what they refer to but who made them. I'm ...   07-22-2022 12:29 am

Thanks again, DGF! ...   07-16-2022 01:31 am

Nice - Thanks! ...   07-16-2022 01:29 am

I found the pics on FB. ...   06-10-2022 04:10 am

Any updates or pictures? ...   06-10-2022 12:46 am

Poorichard wrote: yes everything works, clock, courtesy door light etc and drives like a new 1975 car. A little choke and starts first time each time. Yo, ...   05-31-2022 12:43 am

I see that Tim E. mentions 125Hz for a black belt in this thread: http://www.jensenhealey.com/forums/view_topic.php?id=2253&forum_id=2 ...   05-20-2022 03:20 pm

Hello everyone! 11214 is on the road. I installed a new blue Gates timing belt (from JHPS) and used the Gates app to set it to a ...   05-20-2022 05:04 am

Hi Are there any pictures of a stock Jensen Healey MkI that can be referenced when refurbishing/restoring a car? Engine compartment, front area under the bonnet where ...   05-03-2022 01:37 pm

dwalls1 wrote: Mine was not exactly like yours, but I do remember that one of the two mounting bolts had to be a socket head bolt ...   04-17-2022 03:14 am

dwalls1 wrote: Mine was not exactly like yours, but I do remember that one of the two mounting bolts had to be a socket head bolt ...   04-15-2022 04:11 pm

Thanks DGF! Your thread is the one I've been reading the most. I have an engine like your engine. I was looking at the WOSP starter ...   04-14-2022 09:45 pm

Hi everyone I bought a high torque starter similar to this one: https://www.classiccarperformance.com/products/jensen-healey I've clocked it around to a number of positions and can't seem to get it ...   04-14-2022 01:36 am

This one looks like it could bring some $ ...   04-01-2022 02:36 pm

Esprit2 wrote: Interesting. I always like more legitimate tool options. Another option is a crows-foot, along with an extension and ratchet handle. Most ...   04-01-2022 01:32 am

Hi - I looked around to see if I could find a cam belt tensioner tool and found this on Amazon: https://www.amazon.com/dp/B07G2CW7N7?ref=ppx_pop_mob_ap_share I cut the end out of ...   03-29-2022 12:52 am

Hi JHPS I contacted a British Car shop in the Phila area to see what parts he might have for the JH and he let me ...   03-29-2022 12:46 am

I know. Cheap. ...   02-12-2022 03:08 pm

Not mine https://bringatrailer.com/listing/1976-jensen-gt-3/ ...   02-07-2022 05:06 pm

Here's the episode - JH at ~2:42 https://www.youtube.com/watch?v=z0ish567ZgU I think that the episode was shot in California as Freiburger drives up. ...   11-27-2021 11:23 pm

Hi - I was watching Roadkill and noticed a Jensen Healey in the background. Does anyone know if Mike Finnegan owns it? I could not find ...   11-27-2021 11:01 pm

Thanks noomg ! The tires are new so I'm good there. Also, the car will NEVER be re-painted. I'm going to be maintaining originality ...   11-26-2021 01:21 am

discogodfather - Sir!!! Thank you so much for this post. I've been looking all over for how to conserve these cars for their rust and ...   11-25-2021 03:01 am

Hello everyone! Whelp, I did it. I'm starting to think I'm crazy but Jensen Healey Mk1 S/N 11214 is now in my possession. I searched the ...   11-25-2021 01:14 am

Thanks for all the suggestions and support everyone! I really appreciate your responses. I've been speaking with the owners of a 1973 Mk 1 that has ...   11-03-2021 12:29 am

A quick update. Randy Clary and I had a video conference with the owner of the car in South Pasadena. The day after the call, ...   10-30-2021 01:12 pm

Good morning JHPS! Now, I'm looking at a very clean, no/little rust MkI. Built in mid-February of 73. I'm not sure what engine and other work ...   10-30-2021 01:10 pm