OK - It’s been a crazy couple days here with over 18” of rain falling since early Wednesday morning. Aside from a flooded car and ...   11-22-2024 03:33 am

Hi again - this crossmember rebuild is getting the best of me at every step. I and it are ready to lift and mount ...   11-21-2024 04:39 am

Thanks Bruce. Always appreciate your knowledge and guidance! Thin metal shields will be retired. The seals I got from Greg have a hard rubber coating on ...   11-08-2024 04:38 pm

Have cleaned, painted and reassemble most all the bits on the crossmember. The superpro upper bushings sid not work as the crush tubes are too ...   11-07-2024 06:21 pm

Completely understand and agree with your reasoning and approach. Being new to the JH I did not go get a pair of the ‘outside’ type as ...   10-11-2023 04:56 pm

Progress and a setback! I took noomg’s guidance (and found/watched the Wheeler Dealer 74JH episode), supported the engine from above and removed the crossmember complete. ...   10-11-2023 12:48 am

noomg & Bruce - appreciate the knowledge and guidance! I have toyed w the idea of dropping the subframe but backed off initially cuz of concerns ...   10-06-2023 04:33 pm

Hi Art - thanks for the quick reply. Agreed the pic does not show well but really just a portion of the outer edge is bent ...   10-06-2023 02:31 am

Into replacing bushings, ball joints on my ‘74, 18205. I don’t believe anything’s been replaced from new - upper balljoints rivited. The lower arm bushing ...   10-05-2023 06:56 pm

Ha. Think I figured out the pic post thing… ...   07-12-2023 11:28 pm

‘74 mkII, VIN 18205; engine B74.09.9010; manu date 8/10/74 Bought it mid ‘21 and currently has 59,660 miles. Yellow with tan interior. Interior all original best ...   07-12-2023 11:18 pm