If anyone has updated contact information for Judson Manning please let me know. PM or email me. Thank you. Tim ...   02-02-2024 02:10 am

Thank you for posting this. Very nice documentation. Great to see Yelo Dog alive and well. Looks beautiful! I was fortunate to meet Matt, ...   11-10-2023 05:13 am

Okay, I give up. How do you remove the oil return pipe from the main bearing panel? I don’t want to damage it but it ...   09-24-2023 04:44 pm

Question, 1.) How is the oil slinger held in place?? When I took my rear main seal plate off it was just loose and dangling on ...   09-20-2023 09:05 pm

I'm thinking they're factory Lotus cast 912 pistons probably put in when the 2.2 crankshaft was installed. Since they're dished and maybe around 9.4 compression ...   09-15-2023 05:23 pm

...   09-13-2023 11:34 pm

I was afraid I would here valve train clatter if there was too much clearance but I adjusted to .007 on the intakes and .012 ...   03-17-2020 10:50 pm

Just a follow up from my experience with the valve adjustment procedure. I don't think this was ever done to this engine prior and I ...   03-16-2020 02:40 am

Perfect! Bruce and Tim, Thank you both so much. Now I know the next steps - find a competent machine shop, have the counterbores cut ...   02-25-2020 01:40 am

I'm in the middle of my valve adjustment / re-shimming and I saw the note in a recent post about SB 74-23. I can't find ...   02-24-2020 03:21 am

Okay, My right rear axle seal was leaking, onto the tire and onto the garage floor.. So I pulled the axle shaft, and the ...   06-15-2019 10:10 pm

Thanks Rick!! You pointed me in the right direction. ...   05-13-2019 12:48 am

Update: Problem solved. Thought I would post this for anyone that might come across this issue. The problem was the shifter extention mount. On the ...   05-13-2019 12:46 am

In the final phase of restoration of my Mk1 10626. The engine and trans were from a running, driving '75 - now installed (running and ...   05-12-2019 05:48 pm

Just wanted to post a quick review of the Bilstein shocks I bought from the club store. I've had the KYB's and just removed a ...   05-21-2018 03:42 am

Thanks to all who posted. This is very enlightning... with this information my choice may not be to change the rear diff ratio but to ...   03-09-2018 10:23 pm

I currently have a 3:73 (4 speed), rear axle in my car with a 5 speed Getrag gearbox and I have a 3:45 rear axle ...   03-06-2018 01:31 am

Early JH VIN 10626 Date of Manufacture 10/11/72 All original 22k miles. Just pulled out of a barn in Maryland ...   10-28-2017 03:28 am