I have a full set with 10,000 miles on the tires here in Simi Valley I plan on ordering new VTO wheels very soon Wheels have no ...   06-13-2018 10:17 pm

Kurt, I no so good at this either, I will turn this over to my wife as she understands a bit more! Regards ...   01-08-2017 11:00 pm

Tried to post a picture, but I get a message telling me that the file is too big, only one photo do I do not ...   01-07-2017 11:58 pm

I am happy to, but cannot figure out how to move the pictures into this blog??? ...   01-07-2017 11:44 pm

Glad I could help, Grant is a much more resonable approach for a steering wheel and you can get it at any Pep Boyd. They ...   01-07-2017 06:39 pm

I know this is an old subject, however I have wanted to change out my cracked original steering wheel but did not wish to pay ...   01-05-2017 03:10 am

Welcome to the group, I can guarantee you will find this site helpful in figuring out the eccentricities of these cars. Myself, I have been become ...   06-17-2016 06:32 pm

Finally resolved the cam seal leak. I took the car to my Jensen mechanic in Moorpark. Kevin pulled the cam gears and seals and found ...   06-09-2016 09:43 pm

I used a perfectly matched socket in both attempts, I am beginning to wonder about the fit of the seals I have bought ...   05-15-2016 10:06 pm

I wish you were right, but have replaced the cam seals last year when engine was rebuilt, and again 4 weeks ago when I replaced ...   05-14-2016 08:24 pm

No kinks or restrictions I can see. Does the breather serve any purpose other then directing crankcase fumes back into the engine? I would ...   05-14-2016 06:46 pm

I am running the original air box, as I did not care for the "sucking" noise that most small aftermarket system make. Should I try plugging ...   05-14-2016 05:43 pm

Thank you for the input, but I have replaced the cam cover gasket twice as well. I first used the silicon type, no luck ...   05-13-2016 05:32 pm

Brett, I have tried the sealant on both the Allen screw in the end of the cam as well as on the bolt which secured the ...   05-13-2016 03:50 pm

I actually decided to simply give in to the idea that the car will allways leak, that it is designed to leak and that everyone ...   05-12-2016 05:00 pm

Like others, I have been hunting down oil leaks, which has become a hobby at this point. I changed the new tower cover gaskets that I ...   05-12-2016 03:59 pm

Dan, I completed my exhaust installation and am more the happy with my choices. The one piece header from JHPS was an absolute factory fit. All header studs ...   01-17-2016 05:13 pm

Gordon, I will definitely give them a call to discuss before I order. If they have not addressed the problems, I will need look into the ...   04-04-2015 02:17 am

Gordon, I got carried away on the rest of the system and neglected to discuss your comment regarding the headers, so sorry! As I have not ordered ...   04-04-2015 01:52 am

Gordon< I appreciate your feedback, I guess I must have gotten lucky, as all three silencer and pipe units fit together like a glove. This ...   04-04-2015 01:46 am

As a comment, I just installed a new exhaust system into 18809 last week. Prior to purchase, I spent the past 3 months researching various systems ...   04-03-2015 08:02 pm

Correction to "Earthscrew" earlier post: Vin:18809 is a 1974 model. ...   11-17-2014 08:39 pm

Correction to "Earthscrew" earlier post: Vin:18809 is a 1974 model. ...   11-17-2014 08:38 pm

Correction to "Earthscrew" earlier post: Vin:18809 is a 1974 model. ...   11-17-2014 08:38 pm

This is my first posting, so I hope that I am in the right place. vin: 18809 - 67K Miles,last registered as CA car in 1986. ...   11-17-2014 06:21 pm