Was going to buy it from Lotusbits but that's the only thing missing. ...   05-22-2020 08:01 pm

My triumph has a 123ignition but it's not programmable. It has 7 curves to choose from but it doesn't seem perfect (might be a carbs ...   05-19-2020 08:53 pm

That's good info. I also feel like this swith is not necessary. Instead of risking to get some debris into your hydraulic system you can also ...   08-31-2017 03:15 am

I think you might be able to source some vernier pulleys from one of the typical suppliers. I am located in Germany, so the shipping ...   07-24-2017 10:42 pm

Where abouts are you located? I have a spare set I think but I am not home to check at the moment ...   07-21-2017 12:17 pm

Just to make sure you know how to do it. When you want to down shift go to neutral first. Declutch and then rev the ...   03-01-2016 10:44 am

You could also try double clutching to be sure it is not the synchros. I had this issue with my GT6. It would push into the ...   03-01-2016 10:41 am

Hi, does anybody know how much refrigerant I am ought to fill in the GT AC system? It would be great to have a working AC in ...   06-22-2015 12:19 pm

if it is still of concern I could look which one I ve got on my GT ...   06-12-2015 10:18 pm

from what I ve read I seem to remeber that it is down to wether or not the car had AC. All GTs and JH5 ...   05-04-2015 07:33 am

One more thing, is the amplifier fit to the engine? Because I didn't see it so far... ...   04-20-2015 09:43 pm

Thanks Nigel, you must be very excited starting your engine up for the first time. That is basically what I had in mind but then I ...   04-20-2015 09:41 pm

Getting back to a distributer question. With my spare engine I bought a Lucas 45DM4 electronic distributer. Which came from an Esprit. Will this also ...   04-20-2015 08:12 am

I just googled 26221 and always find the same although I do remember that once the description was wrong... the 26221 x and 26221 xs are ...   11-03-2014 07:08 am

http://www.summitracing.com/int/parts/gri-1-26221-xs this is the link to the rad I bought. Following changes I had to make: 1: cut the radiator frame at the drivers side to make room ...   11-02-2014 09:32 pm

The number should be correct. it s top fitting at passenger side (for LHD) and bottom fitting at the drivers side which is the same ...   11-02-2014 09:20 pm

The Griffin universal radiator 26221-XS fits the GT with minor modifications and only costs 173$ but next time I would probably order one which is ...   10-30-2014 12:57 pm

I just realised that I still have the federal cam timing (115-115) and I was going to change it back to european spec (110-110) Do I ...   10-22-2014 11:44 am

Hi, my AC seems to be out of refridgerant as it just blowing chilled air and not propperly cold air. Is this document still existant and ...   10-12-2014 10:45 pm

That's a great looking car Andreas, congrats. I hope to see it live again soon and thanks for the help while restoring our cars. Das ...   10-06-2014 09:16 pm

Congrats on the car, I love red cars. I also like the idea of a 2.2 How come you wan't an RHD? LHD makes overtaking so ...   10-01-2014 05:47 am

Hi, my blower motor isn't working anymore and I wanted to check the motor. On the GT the motor is accesible through the engine bay as I ...   09-20-2014 12:57 pm

Thanks Tim, that is of great help and very valuable info ...   04-11-2014 08:00 am

btw the guy said it would be a turbo block but as it has iron liners this seems improbable correct? ...   04-10-2014 09:58 pm

I know I am digging up very very old stuff but I somehow didn't find the answer to my question but tends to go into ...   04-10-2014 09:10 pm

I have read somewhere that you could use the same manifold for the 40s and 45s is that correct. If so which changes do I have ...   11-22-2013 03:18 pm

Hi, I have read a little about this topic but still had some questions about a change of bumpers. I really fancy the looks of the ...   07-12-2013 06:35 am

Hi, I just acquiered GT #30344 in Tennessee and imported it to Germany. It is first hand and to be on the road it just needs a ...   07-12-2013 06:30 am