I ordered new hoses from Delta. Just looking for the experiences from others about the best way to change them (without doing something stupid). ...   05-01-2020 01:25 am

UPDATE: I found that on my "SnugTop", a 3/4 inch round foam seal works perfect. I simply glued the foam seal into the recess ...   05-24-2019 12:38 am

I too am looking for parts. But my hardtop is a "SnugTop" built in Long Beach CA. I am looking for some sort ...   05-16-2019 10:26 pm

I had the exact same issue with my car a while back. It was the voltage stabilizer. New one from Moss, problem solved. ...   07-23-2017 11:21 pm

While putting the front of the engine back together, I discovered that the bolt that passes through the tensioner adjuster is stripped.  The aluminum threads ...   04-08-2015 04:12 am

Does anyone have tips on how to access the bolts on the steering rack?  I'm not convinced that mine are OEM, but getting to the ...   03-10-2015 03:56 pm

After I replaced the timing belt and the tensioner bearings, I discovered the timing belt runs towards the back side of the cam pulleys. ...   01-31-2015 06:53 pm

Sorry if this has been a subject before, and I just can't find it.  I would like to know the preferred process for pressing in ...   04-29-2014 03:57 pm

The distributor/oil pump housing also contains the oil pressure relief valve.  The outermost piece of the pressure relief valve is a piston like piece with ...   07-01-2013 07:25 pm

I've read all the posts I can find about the pressure relief valve and the I would like to pull mine and clean it.  Lot's ...   06-20-2013 09:49 pm