I have a 2 piece header thats on my 1974 that is now a Parts Car......I originally purchased the header from either RD or Delta ...   02-05-2014 12:10 am

Hey Mitch, Canton has Remote Filter Adapters.... I believe the OEM Lube Oil Filter thread is 3/4 x 16 but check...they also have the remote mounting ...   04-10-2012 03:21 pm

After much deliberation I decided to go with Federal 595..... 205/60 13's http://www.federaltyres.com.au/tyres/high-performance/595 I purchased them from  http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370364671519 (the usual disclaimers apply) These tires are the required standard for the ...   05-16-2011 01:51 am

John, Did you get the Sumitomo's from discount tires 2go ? If so you recieved the last ones...I had not recieved a shipping confirmation so I called ...   04-22-2011 02:01 am

Thanks for the reply...placed an order today for the Sumitomo's at discount tires 2go Rob ...   04-19-2011 03:58 pm

Have read the posts regarding tire choices for 205/60 - 13's . It appears that the consensus is the Sumitomo HTR 200's....unfortunately they are NLA...called all the ...   04-13-2011 06:26 pm

Brett and Mitch, Thanks for the heads-up! I will open and inspect all the voids. The sills in the voids behind the front wheels had rust perforations. ...   02-05-2011 11:27 pm

Hey Brett....thanks for the reply! What would it be more advantageous for the longevity of the JH's body. Should the inner fender void be sealed or breath/drain out through ...   02-04-2011 09:45 pm

I completed some behind the front wings sill repairs. Ground, sanded and coated  the sills and inner wings etc. I installed new front stone guards and weather seals. The factory weather seal..... ...   02-03-2011 11:01 pm

I am in the midst of removing the instrument cluster. Released the tach and speedo brackets and did battle with the "evil spike" ...... the spike is free (more about ...   11-08-2010 12:25 am

Found the fuse and it was okay. The Hazards will only work with the "Hazard Toggle" in the on position and the "Turn Signal Stalk Switch" ...   11-03-2010 11:29 am

Mike, Thanks for the link....the wiring diagrams and under-dash pics were a big help. Rob ...   11-02-2010 01:25 am

I just bought a 1973, vin 13934 and set about preparing for a NY Inspection. The Hazard Light Switch had come apart so I replaced it with a good take-out from a 74 ...   11-01-2010 02:45 am