Ouch. ...   09-14-2015 12:25 pm

My JH5 had a wiring harness that seemed to be partially a GT loom and partially a JH loom. A couple of extra wires under ...   10-06-2014 02:33 pm

tallyhoe wrote: Something to think about. HS2? HS6 Mitch Ware #19670 #11002 ...   08-25-2014 01:55 pm

I converted my car to SU's. Almost a strait bolt on swap. the float bowl on the front carb hits the alternator though. So I ...   08-21-2014 04:28 pm

Bummer news. Get back behind the wheel soon. Mitch ...   08-12-2014 01:08 pm

The engine is a 912 block instead of a 907. The 912 is a much stiffer block on the bottom and doesn't require the doweling ...   07-28-2014 01:24 pm

Hi Frank, Jensenman's hill climb car is Ron's old race car. Mine is a car that I built last year out of a tub that had ...   07-23-2014 06:37 pm

I'm heading out to Watkins Glen with #11002 this weekend. Road Atlanta is on my bucket list. Thanks for posting the video. Mitch Ware ...   07-17-2014 03:21 pm

From the side of running a body shop, Hagerty has been very easy to deal with. They understood that there was nothing standard about fixing ...   06-30-2014 03:16 pm

I had a free one of these V8's offered to me, with a lightened flywheel, heads already rebuilt, etc. I was going to put it ...   07-10-2013 09:24 pm

It sits on top of the temp and fuel gauges. You need to pull the instrument pod out to get to it. Mitch Ware #19670 #11002 ...   07-07-2013 07:32 pm

It looks like all of the colors were flying, even the brown from when the poo came out. Glad to hear it isn't seriously hurt, and ...   06-26-2013 09:12 pm

Ding, Ding, Ding, Ding, we have a winner! It was a defective oil filter. So today it's off to Lime Rock for the weekend to see if ...   05-30-2013 01:18 pm

Yeah, exact replacement filter. Oil flows from the adapter plate to the filter, then to the oil cooler and back to the adapter plate. I ...   05-29-2013 02:23 pm

Oh, forgot to mention. Gauge was reading fine, then I did an oil & filter change. No big deal, drained oil, changed filter, added new ...   05-29-2013 02:24 am

No leaks anywhere, I have 80lbs of oil pressure at the filter (remote filter housing with electric sender unit there) but I have almost none ...   05-29-2013 02:00 am

Teaser shot of the new E-Prod racer that I am building. Body work is done, drive train is virtually ready to drop in (push in ...   06-25-2012 08:53 pm

Brett Gibson JH5 20497 wrote: Mitch did you see the the club magazine "The Standard" this month an article say's you dont need to mod ...   05-07-2012 09:04 pm

Loosen the clamp at the base of the distributor, it is directly below the intake manifold. You can reach it with a socket on the ...   05-06-2012 02:14 am

Does anyone have pictures of the modifications to the cross member needed for the 912 installation into the JH? Mitch #19670 #11002 ...   05-03-2012 07:05 pm

The Lotus Excel made during the '80's came with a toyota W58 transmission. You can use that bell housing and a locally sourced toyota W-series ...   04-23-2012 06:48 pm

How many volts should be coming down the resistor wire from the tach to the coil? I've got about 2.5, that seems like way too ...   04-21-2012 07:57 pm

And another in Missoula Montana: https://www.iaai.com/Vehicles/Search.aspx?StockNum=9577478#9577478 ...   04-11-2012 03:44 pm

http://www.copart.com/c2/classic_auction_search_results.html?_eventId=getLot&execution=e4s6&lotId=12391662&returnPage=SEARCH_RESULTS Just came across this one. Might be a good solid project car. Mitch Ware #19670 #11002 ...   04-11-2012 03:39 pm

Ah, I see where they have that, thanks! Mitch Ware #19760 #11002 ...   04-10-2012 08:18 pm

On the race car that I am building, I want to use a remote oil filter housing and get the filter out from under the ...   04-10-2012 02:50 pm

I'm not sure what the law is there, in NY you have the right to take your car to whatever shop you choose regardless of ...   03-27-2012 03:23 pm

As a body shop manager, I have dealt with Hagerty for classic car claims. They are VERY easy to work with. Also I have dealt ...   03-27-2012 02:17 am

I've got some shots of when I replaced the outer rockers on the web.http://www.mezzanottealbany.com/Mitch/19670.html ...   03-18-2012 05:06 pm

I'd unscrew the cable from the wiper motor and see if the end is rounded off. Easier to get to that than it is the ...   02-25-2012 08:34 pm

I've been watching your racing videos and following your V8 road car build. I'm in the process of building my own JH race car and ...   02-08-2012 09:26 pm

1: 1963 Plymouth Valiant 2: 1963 Buick LeSabre 3: 1971 Olds Toronado 4: 1968 Buick Special Deluxe Station Wagon 5: 1974 Honda Civic 6: 1980 Triumph Spitfire 7: 1988 Mitsubishi Mighty Max Pickup 8: 1992 Mitsubishi Diamante 9: 1989 Toyota Supra Turbo ...   02-05-2012 04:46 pm

  Thanks Pete, that is a good start for what I was looking for. But, of course that leads to more questions. ...   12-13-2011 06:52 pm

I'm starting to figure out the budget for switching over from racing the MGB/GT and going to racing a JH. We have been building our ...   12-12-2011 09:46 pm

It could also be the starter. Has it ever been changed / updated? Mitch @#19670 ...   11-15-2010 07:34 pm

Having restored a Jensen Healey and a Triumph TR6, I can tell you that due to this club it is far easier to do a ...   10-26-2010 01:05 pm

I moved my page, here is the correct link. http://www.mezzanottealbany.com/Mitch/stereo.html I'm sure that these stereo components aren't available anymore and have been replaced with newer ones at ...   10-19-2010 01:01 pm

I did the Delta system on my car when I did the restoration. It went on like a dream. Mitch Ware #19670 ...   05-04-2010 06:50 pm

Finally got the chance to put my car back together (nothing like having it sit on jackstands, staring at me in my garage for 10 ...   03-25-2010 04:33 pm

Contact Pete Bahr, peteb01@comcast.net He offers replacements, very nice work Mitch - #19670 ...   03-25-2010 01:37 pm