Hey Mark, Thanks as always for details replies. To be more specific about my question: I have a VERY accurate oxygen sensor, it reads ...   09-24-2005 06:36 pm

Hey all, When I pull off the line 16984 hesitates, runs like a Hugo, until it gets to about 2000 - 2400 rpm then takes off ...   09-24-2005 01:25 pm

I would love this to work out, but I'm not comfortable that this is going the way it should, it seems like too much guess ...   09-14-2005 01:02 am

Powerder coated for $35 each? Did that include the clean up too? Please post some photos of how they come out. Mine ...   09-11-2005 02:26 pm

I'm with you on this. If you've got the access to facilities to make carbon fiber replacements everyone should be all over this. One, ...   09-11-2005 02:08 pm

So in other words, as long as my gauge is working, there isn't much benefit from an "upgrade". Hmmmm. Maybe I'll break down ...   09-05-2005 12:01 pm

Is there by any chance a drop in replacement that has the actual temperatures listed on the gauge? I watch that needle run over towards the ...   08-14-2005 01:12 pm

Most often when I've had the problem that the engine does not fire at all - no cough, sputter, or other engine noise, it's something ...   08-02-2005 03:43 am

Don't slow down, just replace the rubber every now and then:) ...   07-17-2005 02:10 pm

There are a couple on ebay right now, a pair of the front panels and they look in reasonable shape.  New stainless steel ones would ...   07-09-2005 04:22 pm

and I'm not talking Mick Jagger either.  The ugliness of 16984 continues to be revealed as I peel back layers of bad fiberglass work, bad ...   07-09-2005 01:27 pm

How about aloaner carb tune that makes the rounds......? ...   05-28-2005 02:14 pm

It looks a lot like mine (now in the evil clutches of the local body shop where it's been for the last six months). Once ...   05-15-2005 09:18 pm

I'm looking at the idea of eventually upgrading to 107 or 107/104 combination cams.  How difficult is it to install cams into a stock 2.0?  How easy ...   04-29-2005 01:16 pm

Too bad there isn't a supply of used Panasports, $800 + tires and my wife would go nuts!:) Dave ...   04-25-2005 11:37 pm

Hey Mark, I've been looking for a spare heater box for a while to do some experimenting with upgrading the JH heater system. Upgrading the ...   04-21-2005 02:10 am

I saw this newsletter in a recent Washington Post and thought it was interesting and maybe a good warning for our beloved 907's... The Oil-Additive Secret ...   03-16-2005 05:10 pm