| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Oil for engine and transmission | Rating: 
|
| Author | Post |
|---|
| Posted: 03-22-2011 06:56 pm |
|
1st Post |
|
Anton Member
|
Hi all, I need you advice:
|
||||||||||||||
| |||||||||||||||
| Posted: 03-23-2011 05:31 am |
|
2nd Post |
|
SpeedyMitch Member 
|
Anton wrote: What type/brand oil and how many litres should I use for the engine of my JH MKI, 4 speed? I'm happy with Red Line 10-40wt. Prior to this I used Valvoline VR-1 20-50wt. http://www.jensenhealey.com/forums/view_topic.php?id=1530&forum_id=10 Lots of good info in this thread: http://www.jensenhealey.com/forums/view_topic.php?id=1148&forum_id=2 The Workshop manual says 5L in the engine. For the transmission I use 2L Valvoline VR-1.
|
|||||||||||||
| ||||||||||||||
| Posted: 05-13-2011 12:08 am |
|
3rd Post |
|
Jensen Healey Super Moderator 
|
I just replaced the rear tranny seal re-filled with synthetic Red Line MTL. I took her out for a 20 mile jaunt to see if there was a noticeable difference. It seems to shift a little smoother and has a little less gear whine while driving. Certainly no issues to report. To reduce the pain involved with refilling I drilled a 2" hole across from the fill plug. A metal plate now covers the hole and a finish plate is in the works to cover the hole in the carpet. Kurt
|
||||||||||||||
| |||||||||||||||
| Posted: 05-15-2011 02:07 pm |
|
4th Post |
|
subwoofer Member
|
I used 75W-90 semi-synthetic GL4/5 oil from the closest auto supply to replace the oil in the gearbox. Immediately smoother, and almost all the gearbox whine gone. Filled as per workshop manual instructions. -- Joachim
|
|||||||||||||
| ||||||||||||||
| Current time is 08:12 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > Oil for engine and transmission | Top |
