| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Fuel tank | Rate Topic |
| Author | Post |
|---|
| Posted: 11-16-2016 01:47 pm |
|
1st Post |
|
scottsmi Member
|
Haven't seen any new conversations about finding a new fuel tank recently. Anybody found a suitable replacement? I had my old tank repaired and coated at a radiator shop and it still leaks. Does any one know if I can just recoat again? Martin Robey lists one on their site, anybody tried that?
|
||||||||||||||
| |||||||||||||||
| Posted: 11-16-2016 03:31 pm |
|
2nd Post |
|
redracer Member
|
POR15, KBS, Mastercoat ( http://www.masterseriescoatings.com/index/products/primer/ ) will work just fine even on heavily pitted and "holey" tanks. They are easy to use so you can do it yourself. Not sure what your radiator shop did but they should certainly guarantee it. I've seen POR even fill up "quarter" size holes(putting tape on the back for leveling) with no problems. If the leak is around the sending unit flange, using Permatex #2 or equivalent will seal that up fine
|
|||||||||||||
| ||||||||||||||
| Posted: 11-17-2016 12:56 pm |
|
3rd Post |
|
scottsmi Member
|
Thanks. Do you use the mastercoat as a primer then POR? What is KBS?
|
||||||||||||||
| |||||||||||||||
| Posted: 11-17-2016 01:37 pm |
|
4th Post |
|
redracer Member
|
Before I would do anything myself,I would first DEFINITELY call the radiator shop to see if they could redo the work, and if they don't, at least find out what products they used to seal your tank. Undoing the current coating that is inside will make this job much harder. The 3 companies I mentioned above all do "rustproofing". POR15 is for gas tank and outercoat, Mastercoat for outer surfaces(not sure if they make an internal gas tank sealer). I have never used KBS, but I would imagine it works like the other 2 companies. http://www.por15.com/Fuel-System-Restoration_c_17.html ,, http://www.masterseriescoatings.com/index/ ,, https://www.kbs-coatings.com/tank-sealers.html
|
|||||||||||||
| ||||||||||||||
| Posted: 11-18-2016 01:37 pm |
|
5th Post |
|
scottsmi Member
|
Thanks for the followup! I now have a plan to move forward. Still wish I could get a new tank but oh well.
|
||||||||||||||
| |||||||||||||||
| Posted: 11-18-2016 06:35 pm |
|
6th Post |
|
Screenplay Member
|
There are a couple of sources for new tanks if the repair doesn't work out (or you feel like spening the money). I was looking at this issue a couple of years ago and this is what I found: One is the guy who advertises on ebay. He's in Southern California and makes tanks for the JH in both steel and aluminum. His prices seem to vary ($400-500) but there were mixed reviews of his produts (quality issues) as reported here on this forum.The posts are somewhere under "Fuel Stuff" if you want to read, but I can't see having an internet/telephone argument with someone hundreds or thousands of miles away if there's a problem. The second is Axeminster Panel Specialists in the UK. This is a one man shop that produces top quality aluminum products of all sorts with much of his business coming from replacement and custom tanks. It took a few months to get mine as he keeps fairly busy, but it was well worth the wait. It's beautifully crafted and is now the centerpiece of the trunk. It was a bit pricey at the time ($700+ with shipping) but with the drop in the English pound the price should now be on par with the guy in SoCal. I just checked his website and I no longer see the JH as an option, but I'd ask anyway as he's made a number of them in the past. You wouldn't be disappointed. Check out the website just to see some of his work - it's old world craftsmanship. Website: http://axminsterspecialistpanels.com/ Clinton The tank: Attachment: Jensen Healey fuel tank resized .jpg (Downloaded 91 times)
|
|||||||||||||
| ||||||||||||||
| Posted: 11-19-2016 06:13 am |
|
7th Post |
|
Randallclary@icloud.com Member
|
I bought an aluminum fuel tank that was new from this seller on eBay and I was fairly happy with the result. I did have a very small pinhole leak in the side of the tank and I may have caused it. I had it repaired at a speciality weld shop and was charged $40. I think that there is a very good chance that it may not neak at all, but I would check next time using water or low air pressure and soap. Here is a link to the site. He also has ones made from steel a little less expensive. The tanks looked identical and fit perfectly in the car. http://www.ebay.com/itm/JENSEN-HEALEY-FUEL-TANK-BRAND-NEW-ALLOY-/371789300236?hash=item56905e820c:m:mRSj8ZaqhCMzmYrwQZMZXpQ You may have to cut and paste this link to your browser to get to the correct site. Good luck.
|
||||||||||||||
| |||||||||||||||
| Posted: 11-19-2016 03:21 pm |
|
8th Post |
|
scottsmi Member
|
Thanks all for your help. I also contacted Martin Robey and they said they are getting ready for a new production run of JH tanks made from aluminum, in about 3-4 weeks. No idea of price yet, here is the web site: keith.jackson@martinrobey.com
|
|||||||||||||
| ||||||||||||||
| Current time is 04:54 pm | |
| > Jensen Healey & Jensen GT Tech > Fuel Stuff > Fuel tank | Top |
