| ||||
Moderated by: Greg Fletcher |
|
Steering column excessive in and out play | Rate Topic |
Author | Post |
---|
Posted: 05-29-2018 05:07 pm |
|
1st Post |
tallyhoe Member
|
I know the beast was hit and maybe bottomed onto something due to repaired damage but I can push the shaft back into the firewall from below and the u-joint back into proper position as compared to my 76. Any ideas what got mushed?
|
||||||||||||||
|
Posted: 05-30-2018 11:05 am |
|
2nd Post |
gmgiltd Member
|
From memory -The inside of the collapsible steering column consists of a square bar fitted internally to a square tube retained by two plastic pins. In an impact the plastic pins shear allowing the column to collapse. If you can not source new shear pins there are various alternative solutions such as garden strimmer filament or heavy gauge soft copper wire. The original plastic pins are pretty fragile. Gordon
|
|||||||||||||
|
Posted: 05-30-2018 12:52 pm |
|
3rd Post |
tallyhoe Member
|
Thanks. I am dissecting the beast today. and will keep you informed.
|
||||||||||||||
|
Posted: 05-30-2018 01:56 pm |
|
4th Post |
Brett Gibson JH5 20497 Member
|
Sound to me that the honey comb metal webbing that surrounds the central shaft has been compressed.
|
|||||||||||||
|
Posted: 05-30-2018 02:04 pm |
|
5th Post |
tallyhoe Member
|
My first thought also but the whole shaft moves with the steering wheel. We shall see.
|
||||||||||||||
|
Posted: 05-30-2018 02:24 pm |
|
6th Post |
Brett Gibson JH5 20497 Member
|
could be the end bearing housing at the steering wheel as well, does it drop a little when you pull it towards you, my shaft pin has been broken for years but I don't get any play, results may vary...……..
|
|||||||||||||
|
Posted: 05-30-2018 02:43 pm |
|
7th Post |
tallyhoe Member
|
No flopping at the wheel that I can remember, but I have not tried that test yet.
|
||||||||||||||
|
Posted: 05-30-2018 02:44 pm |
|
8th Post |
tallyhoe Member
|
No flopping at the wheel that I can remember, but I have not tried that test yet.
|
|||||||||||||
|
Posted: 05-31-2018 02:59 pm |
|
9th Post |
tallyhoe Member
|
Yup, Brett was correct and the webbing is collapsed but all there. Does anyone know if can be straightened and still kinda work?
|
||||||||||||||
|
Posted: 05-31-2018 05:07 pm |
|
10th Post |
Brett Gibson JH5 20497 Member
|
If your on Face Book, put a post up in Jensen-Healey wanting a good used one, I'm sure someone in that group or even here has one for a good price. personally I would not recommend trying to cobble it back.
|
|||||||||||||
|
Posted: 05-31-2018 05:45 pm |
|
11th Post |
tallyhoe Member
|
Kinda figured that. Thanks. I'll look around.
|
||||||||||||||
|
Posted: 06-02-2018 08:26 am |
|
12th Post |
answerman Member
|
Is this Jay from Minnesota? I've got at least one extra column... more for you to look at when you visit, right?
|
|||||||||||||
|
Posted: 06-02-2018 12:48 pm |
|
13th Post |
tallyhoe Member
|
"That is correct, sir". I may need a bigger van.
|
||||||||||||||
|
Current time is 04:47 am | |
> Jensen Healey & Jensen GT Tech > Suspension > Steering column excessive in and out play | Top |