| ||||
Moderated by: Greg Fletcher |
|
Steering Rack pinion bearings | Rating: |
Author | Post |
---|
Posted: 04-09-2015 07:24 pm |
|
1st Post |
Andir Member
|
Anyone have a source for these bearings. They are 1 1/4 " x 9/16" x 7/16 angular contact ball bearings
|
||||||||||||||
|
Posted: 04-10-2015 06:59 am |
|
2nd Post |
subwoofer Member
|
Are those the bearings that cause the pinion shaft to go wobbly? If so, if you find a source, please tell us where! But if you have a bearing number for them (usually printed on the side of the inner and outer races), look up the SKF catalog. -- Joachim
|
|||||||||||||
|
Posted: 04-10-2015 07:33 am |
|
3rd Post |
Andir Member
|
They would be the ones. If yours is wobbly then re-shimming to take up the play may work. Mine has a completely seized bearing so I must find a replacement. So far I have a 1622 which is a larger OD and not angular contact however the thrust force is not huge in the pinion. If I can get a 1622 in angular contact I will ream the lower housing to fit.
|
||||||||||||||
|
Current time is 05:54 am | |
> Jensen Healey & Jensen GT Tech > Suspension > Steering Rack pinion bearings | Top |