| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| DMS front sway bar... | Rate Topic |
| Author | Post |
|---|
| Posted: 04-23-2009 05:05 am |
|
1st Post |
|
dixiedog Member
|
Anybody know what the two angle brackets are for in the hardware package from DMS ? My sway bar forward links seem to interfere with the a-arms when they hang down...sway bar isn't mounted yet.
|
||||||||||||||
| |||||||||||||||
| Posted: 04-23-2009 03:02 pm |
|
2nd Post |
|
Jensenman Member
|
Not all cars had the mount points for the links welded to the control arms, so those are included just in case. As far as the links interfering with the control arms, ? Mine worked fine. I did discover that due to differences in manufacturing tolerances my cars are each different, the early '74 has the frame rail upward bends closer to the crossmember than the late '74. Last edited on 04-23-2009 03:14 pm by Jensenman |
|||||||||||||
| ||||||||||||||
| Current time is 04:48 pm | |
| > Jensen Healey & Jensen GT Tech > Suspension > DMS front sway bar... | Top |
