Triplesn8s
Member
| Joined: | 04-27-2007 |
| Location: | |
| Posts: | 25 |
| Status: |
Offline
|
|
I got rid of the body shell and will be ebaying some very nice doors and boot lid. I took some apparently aftermarket swaybars off the car for ebay and was considering putting the springs on too but only if they were aftermarket performance springs. I don't have stock front springs for comparison so if anyone can tell me what stock springs measure I would appreciate it.
The front springs I have have a free length of exactly 11 inches (27.9cm) and a wire diameter of .520" (13.2mm). I did not check the wound diameter of the spring itself. Can anyone tell me if these are stock or not?
TIA,
Bill
|
