Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Mystery Wire  Rate Topic 
AuthorPost
 Posted: 05-15-2006 09:30 pm
  PM Quote Reply
1st Post
Jim DeClerck
Member


Joined: 03-16-2005
Location: Huntington Beach, California USA
Posts: 73
Status: 
Offline
While I have the radio out and am trying to replace warning light bulbs and the heater control illumination light bulb, I noticed a bright green wire with a gray bullet connector socket hanging down.  See attached picture.  Does anyone know the factory's intent for this wire?  The view is through the radio opening in the center panel.

Attachment: 100_0860b.jpg (Downloaded 183 times)

Last edited on 05-15-2006 09:32 pm by Jim DeClerck

Back To Top PM Quote Reply  

 Posted: 05-16-2006 12:57 am
  PM Quote Reply
2nd Post
John Finch
Member
 

Joined: 08-01-2005
Location: Minneapolis MN
Posts: 122
Status: 
Offline
Jim, I just did the radio on 18309 and it had the same thing. 'Bout drove me nuts. My car had air install previously. Othewise I'm wondering with you.. Hope someone has the answer. I've reinstalled the radio etal and so far all is working.....

Back To Top PM Quote Reply

 Posted: 05-16-2006 01:14 am
  PM Quote Reply
3rd Post
Judson Manning
Member


Joined: 03-14-2005
Location: Atlanta, Georgia USA
Posts: 406
Status: 
Offline
Me thinks that is the fabled Overdrive feed wire shown on the wiring diagram that Jensen planned to use but never got around to doing.  According to my wiring diagram it is G-85-SC.

I just had a brain-storm....hmmmm....this would be a convenient Ignition switched lead for the MSD unit we installed in Sander's car.  Thanks Jim for the inspiration!

Back To Top PM Quote Reply  

 Posted: 05-16-2006 04:38 am
  PM Quote Reply
4th Post
Jim DeClerck
Member


Joined: 03-16-2005
Location: Huntington Beach, California USA
Posts: 73
Status: 
Offline
Yes, it is ignition switched.  I'll hook it up to my newly installed electric radio antenna as the power source.  Good luck w/the MSD.

Back To Top PM Quote Reply

 Posted: 05-16-2006 07:43 am
  PM Quote Reply
5th Post
Jim DeClerck
Member


Joined: 03-16-2005
Location: Huntington Beach, California USA
Posts: 73
Status: 
Offline
Judson, you must have a different wiring diagram than mine.  Cable number 85 on mine is GW-85-SC.  It connects between #2 in the Steering Column 9 Way Socket and the RH Flasher Junction.  I don't see a G-85-SC.  My wiring diagram is glued into the rear cover of the  "Jensen - Healey Owners Handbook" that was in the trunk of 14482 when I bought it used in 1982.  The Mystery Wire photo I took featured 19336 which came without an owners manual.  Were there more than one JH wiring diagrams?  If so, it helps explain why I'm having trouble making sense of some of the circuits, such as those connected to the Lucas alternator.

 

Back To Top PM Quote Reply  

 Posted: 05-16-2006 04:45 pm
  PM Quote Reply
6th Post
Mark Rosenbaum
Member


Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
My (1974?) copy of the parts list shows three different wiring harnesses:
90586, used on LHD cars to VIN 13349
91408, used on RHD cars apparently regardless of VIN
92991, used on LHD cars VIN 13350 up.

In addition, the GTs reportedly use a different wiring harness.  I suppose that some very late cars may have had the GT harness, or some experimental predecessor thereof, installed during manufacture.  But the Jensen factory was generally pretty good about changing part numbers when parts were revised, so one can reasonably expect all other JHs to have one of the harnesses listed above.

In addition to the Delta Motorsports wiring diagram, there are several others of which I'm aware.  The Jensen Motors online version dated 1999, seems oriented towards European cars and lacks the special wiring used in North American vehicles.  I don't have copies of the others, but IIRC they were all subtly different from each other, and at least one was both incomplete and wrong.  For what it's worth, my car is a MkII with a 92991 harness, and before I removed the seat belt warning system wiring, there was a 100% correspondence between its wiring and Delta's diagram.

On the Delta Motorsports wiring diagram:

(1) There is a wire G-85-SC that runs from the IGN FUSE JUNC R.H. to a bullet receptacle labelled O/D FEED.  This wire is powered when the ignition switch is in the RUN position.  I would presume this to be the mystery wire in question.

(2) There is a wire WU-84-SC that runs from the IGN SW 5-WAY SOCKET to a bullet receptacle labelled RADIO.  This wire is powered when the ignition switch is in the ACCESSORY or RUN positions.

Last edited on 05-16-2006 04:48 pm by Mark Rosenbaum

Back To Top PM Quote Reply

 Posted: 05-16-2006 05:25 pm
  PM Quote Reply
7th Post
Jim DeClerck
Member


Joined: 03-16-2005
Location: Huntington Beach, California USA
Posts: 73
Status: 
Offline
Thanks again Mark.  My next order from Delta will include their wiring diagram.    Too bad it's not immediately accessable on- line somewhere.  I have downloaded and printed the 1999 Jensen Motors diagram but it's less useful since it shows only cable colors and not the full wiring codes including cable numbers.

Back To Top PM Quote Reply  

Current time is 07:22 pm  
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > Mystery Wire Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems