| Moderated by: Greg Fletcher | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
jomac Member
|
light switch -what was jensen healey's original purpose position 1 = off position 2 = on -(my JH is lo beam and running lights) position 3 = on -(my JH is hi beam and running lights) |
|||||||||
|
redracer Member
|
Position 2 should be running lights only; sounds like the inside copper contact is hitting the 3rd contact as well in the #2 position. Hi/Lo should be the for/aft movement of the switch. Maybe the previous owner broke the white nylon hi/lo piece(I've seen that many times) and rewired it for what you now have? |
|||||||||
|
jomac Member
|
thanks , i'll take apart the switch and investigate. |
|||||||||