| ||||
Moderated by: Greg Fletcher |
|
Holes under clock | Rate Topic |
Author | Post |
---|
Posted: 08-13-2018 12:20 am |
|
1st Post |
DonBurns Member
|
15800 has been without a clock. Found a non-working one on ebay and had refurbished by D&M restoration. Looks like new! While installing I noticed the two holes in the foam just below the clock. Does anybody know what those are for? From the darker color of the foam surface I assume they were original. Once someone reminds me I'll probably remember from my first JH in the 70's, but at the moment it's not coming to me. Thanks- Attachment: holes under clock.jpg (Downloaded 74 times)
|
||||||||||||||
|
Posted: 08-14-2018 02:23 pm |
|
2nd Post |
redracer Member
|
Those are the 2 screw holes for attaching the "foam" to the metal surround(behind all the "foam" oieces
|
|||||||||||||
|
Posted: 08-14-2018 02:36 pm |
|
3rd Post |
DonBurns Member
|
Thanks - those metal pieces seem to be missing. Probably not that important.
|
||||||||||||||
|
Posted: 12-03-2018 03:07 pm |
|
4th Post |
noomg Member
|
Don, I'm just finishing restoration of my dash. I'm using a nice unmolested lower foam piece like yours. While my clock was installed in the glove compartment, there are no holes in the bottom of that piece on that side of the steering wheel. It's possible your holes are original because of the clock location but the foam surround is molded to the main piece unlike the other side which is separate and held on with screws.
|
|||||||||||||
|
Current time is 06:51 am | |
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > Holes under clock | Top |