| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Seat Belt Warning Buzzer | Rate Topic |
| Author | Post |
|---|
| Posted: 01-20-2015 10:48 pm |
|
1st Post |
|
farmbroker Member
|
Gentlemen, I removed the seat belt switches from under the seats when I replaced the carpet, but my warning buzzer still seems to want to sound off from time to time. I don't know why it's not constant just makes a muted sound every once in a while. Can I just delete the buzzer without affecting the electricals? Seemed to me several years ago someone showed how to place a jumper wire from two pins in the 5 way connector to trick the warning buzzer into a complete circuit. Any thoughts would be helpful, Thanks Farmbroker
|
||||||||||||||
| |||||||||||||||
| Posted: 01-21-2015 03:20 am |
|
2nd Post |
|
Greg Fletcher Administrator 
|
I pulled my buzzer out and tossed it years ago. No buzzer = happy driving.
|
|||||||||||||
| ||||||||||||||
| Posted: 01-21-2015 05:23 am |
|
3rd Post |
|
Frank Schwartz Member
|
Greg is correct...just toss the durned thing...but remember to jumper #11 and #12 on that plug that was into the buzzer unit, or it won't start...if I remember correctly
|
||||||||||||||
| |||||||||||||||
| Current time is 03:39 am | |
| > Jensen Healey & Jensen GT Tech > Electrical & Instruments > Seat Belt Warning Buzzer | Top |
