Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Brakes > Silicone brake fluid quantity

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Silicone brake fluid quantity  Rate Topic 
AuthorPost
 Posted: 01-10-2022 04:29 pm
  PM Quote Reply
1st Post
rederic48
Member
 

Joined: 12-24-2020
Location:  
Posts: 8
Status: 
Offline
Hello
I am intending to overhaul the brake system on my 73 JH and intend to change to silicone brake fluid. Anybody know what quantity I need to buy to fill the system? Bought new master and rear brake cylinders plus seals for front callipers. I intend to blow through the existing brake pipes with compressed air.
Thanks

Back To Top PM Quote Reply  

 Posted: 01-11-2022 12:14 pm
  PM Quote Reply
2nd Post
subwoofer
Member
 

Joined: 04-01-2008
Location: Sandefjord, Norway
Posts: 617
Status: 
Offline
Any particular reason you want to go through the trouble of changing to silicone fluid? If you cook your brakes on a regular basis, DOT 5.1 fluid has a higher boiling point than DOT 4 but no special procedures required. If you for some reason manage to introduce droplets of water into your silicone filled system, getting them out again may be a challenge as the fluid and water won't mix, while with regular brake fluid you just need to flush out the old.

Silicone fluid is supposedly more compressible too, so is said to give a softer pedal.

--
Joachim

Back To Top PM Quote Reply

 Posted: 01-11-2022 03:21 pm
  PM Quote Reply
3rd Post
gmgiltd
Member
 

Joined: 07-10-2012
Location: Whitehills , United Kingdom
Posts: 168
Status: 
Offline
DOT 3,4 and 5.1 are glycol based and DOT 5 is Silicone based - glycol and silicone based fluids are not compatible with each other. In my case I upgraded the brakes to larger vented discs with 4 piston radial calipers on the front and rear discs with 2 piston calipers, but retained the original master cylinder. The braking system was previously filled with DOT 4 . The manufacturer of the discs and calipers (Hispec) advised me not to under any circumstances mix the two as the seals would be damaged -competition brake systems and road car upgrades are their core business so I would suggest that they have some experience in this field. DOT 5.1 has an even higher boiling point than DOT 5. Dot 5 silicone is more suitable for competition cars where the fluid is changed regularly - on a road car moisture will not be diluted in the fluid so if the brakes are worked hard the water can rapidly go from non compressable fluid to compressable steam vapour resulting in no brakes.
Gordon

Back To Top PM Quote Reply  

Current time is 05:03 am  
> Jensen Healey & Jensen GT Tech > Brakes > Silicone brake fluid quantity Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems