Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Brakes > Rear Disc Brakes

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Rear Disc Brakes  Rating:  Rating
AuthorPost
 Posted: 06-21-2008 04:39 am
  PM Quote Reply
1st Post
G2Sound
Member
 

Joined: 07-23-2007
Location:  
Posts: 2
Status: 
Offline
Has anyone out there fitted the stock JH4 Rear end with disc brakes? If so, what parts did you use and how did you do it?

Back To Top PM Quote Reply  

 Posted: 06-21-2008 04:22 pm
  PM Quote Reply
2nd Post
Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
Welcome! Try this thread:

http://www.jensenhealey.com/forums/view_topic.php?id=502&forum_id=6

 

Kurt

Back To Top PM Quote Reply

 Posted: 07-25-2008 02:44 am
  PM Quote Reply
3rd Post
JHRV8
Member
 

Joined: 01-03-2008
Location:  
Posts: 40
Status: 
Offline
Say, has anyone thought about swapping in the entire rear-end from a Volvo? I did and it is only 1/2 inch wider than the origional  JH/ Vauxhal one; is a spicer 30 unit so is much stronger, has a limited slip dif from the factory, has the disk brakes standard equipment, has a emergency brake in the brake disk and weighs only slightly more than the stocker.  Required some brackets be made and some careful welding, but was in  in about a weekend.....just a thought.  I also equiped the front spindles with Volvo hubs and disks; swapped out the master cylinder for a volvo and ended up with a easily obtained, really inexpensive, and superior brake system, even used 5 lug wheels which are readily available. If you can fabricate, it might be for you.

Back To Top PM Quote Reply  

 Posted: 07-25-2008 03:13 am
  PM Quote Reply
4th Post
jcdean
Member
 

Joined: 02-22-2006
Location: Oklahoma City, Oklahoma USA
Posts: 169
Status: 
Offline
I would really like to see any pictures you may have on these mods.  email them to me at mytherial@hotmail.com.

Back To Top PM Quote Reply

 Posted: 07-25-2008 05:25 pm
  PM Quote Reply
5th Post
G2Sound
Member
 

Joined: 07-23-2007
Location:  
Posts: 2
Status: 
Offline
What years and models are the Volvo parts from?

Back To Top PM Quote Reply  

 Posted: 07-25-2008 05:46 pm
  PM Quote Reply
6th Post
Joel
Member
 

Joined: 07-01-2005
Location: San Diego, USA
Posts: 184
Status: 
Offline
I think a lot of folks would be really interested in pictures and some more info on exactly what parts you used.  It sounds like a very nice upgrade.

Back To Top PM Quote Reply

 Posted: 07-26-2008 01:29 am
  PM Quote Reply
7th Post
JHRV8
Member
 

Joined: 01-03-2008
Location:  
Posts: 40
Status: 
Offline
The Volvo rear end can be from really any late model 140-164-240 264-265 they are all essentially the same; just pick the final gear ratio you want. Mine is late  model 265 from a station wagon just because I had it and it had the 3.31 ratio with posi, that I needed.  Cost was about $ 40.00 for everything.  I will shoot a set of pictures for all to see and probably write an article on the swap,soon.

Back To Top PM Quote Reply  

 Posted: 08-04-2008 06:33 am
  PM Quote Reply
8th Post
subwoofer
Member
 

Joined: 04-01-2008
Location: Sandefjord, Norway
Posts: 617
Status: 
Offline
Please do! Volvo parts are cheap and plentyful here in Norway, so this kind of conversion is exactly what I am looking for, at least.

--

Joachim

Back To Top PM Quote Reply

 Posted: 09-12-2008 04:51 am
  PM Quote Reply
9th Post
mnunes22
Member
 

Joined: 03-02-2008
Location: Manteca, California USA
Posts: 17
Status: 
Offline
Sounds good. Did you modify your drive shaft? How did the 3.31 ratio feel on the road? What size tire do you have now? How much did your RPM drop at freeway speeds, say 70 mph?  I'm looking forward to any pictures, articles details that you can share!


Thanks, Bill
 

 

Back To Top PM Quote Reply  

 Posted: 09-17-2008 05:32 am
  PM Quote Reply
10th Post
JHRV8
Member
 

Joined: 01-03-2008
Location:  
Posts: 40
Status: 
Offline
 New driveshaft needed, made my own, as have done many in the past.  Final drive ratio with the 3.31 rearend and a 0.70 fifth gear from a T-5 trans= 2.38:1. Which cruise at really low rpms, getting very good mileage I hope. Not on  the road yet.... too many details.   Oh and sent some photos to Greg c/o JHPS, hope that he recieved them.

Last edited on 09-17-2008 05:35 am by JHRV8

Back To Top PM Quote Reply

 Posted: 10-04-2008 06:29 pm
  PM Quote Reply
11th Post
richbthomas
Member
 

Joined: 09-30-2008
Location:  
Posts: 6
Status: 
Offline
jhrv8. Are you from Clear Lake? If so, I talked to you at Dixon a year ago or so. I lost your phone #. Would like to make a trip up your way and see your brake mod. first hand. Reply to email richbthomas@comcast.net Thanks, Rich

Back To Top PM Quote Reply  

 Posted: 10-17-2008 05:08 am
  PM Quote Reply
12th Post
JHRV8
Member
 

Joined: 01-03-2008
Location:  
Posts: 40
Status: 
Offline
Rich: I'm the same guy. recently sent contact info to your E-mail address- haven"t heard from you.....The J-H is in limbo awaiting the end of crush.  This winter wil get back on it, finances allowing- will write the definitive essay on How-to-do the conversion then.

Back To Top PM Quote Reply

Current time is 04:15 pm  
> Jensen Healey & Jensen GT Tech > Brakes > Rear Disc Brakes Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems