| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Not Starting | Rate Topic |
| Author | Post |
|---|
| Posted: 04-24-2007 10:51 pm |
|
1st Post |
|
Bobby Member
|
Hi, I bought my first 1976 GT at the weekend and whilst driving home after about 10 miles it started to splutter a wee bit then conked out altogether. I had to get and MOT so i got the guy to set up the carbs while he had the car in for the MOT, it started a treat and ran well for about 4 miles then conked out again. I fitted a new coil tonight and it was running great and pulling good too, it ran for about 8 miles and started to splutter again so i headed for home, when i got home i let it cool down for half an hour and turned it over but nothing there. I removed 2 of the plugs to see how strong the spark was but there was no spark at all. I checked the distributor cap but looks good to me, no loose wires either can anybody help please. Bobby
|
||||||||||||||
| |||||||||||||||
| Posted: 04-25-2007 01:45 pm |
|
2nd Post |
|
jcdean Member
|
I had this happen to me before. Mine was a fuel pump issue. Joey
|
|||||||||||||
| ||||||||||||||
| Posted: 04-25-2007 10:10 pm |
|
3rd Post |
|
Bobby Member
|
Joey, Thanks for the tip but i think i might have sussed the problem. The car had electronic ignition fitted before i bought her and the coil that i fitted last night did not have a ballast resister built in......? I am told this is imperative otherwise the coil will burn out. I will post the outcome tomorrow night once i try the proper coil out, but thanks anyway. Bobby
|
||||||||||||||
| |||||||||||||||
| Current time is 07:35 pm | |
| > Jensen Healey & Jensen GT Tech > Ignition > Not Starting | Top |
