| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Dellorto Gas Feed Location | Rate Topic |
| Author | Post |
|---|
| Posted: 03-29-2005 05:30 pm |
|
1st Post |
|
Brett Gibson JH5 20497 Member
|
Hello all I just picked up some Dell's for my little toy and while I dont have them in front of me right now, I've been noticing on all the other cars that have Dell's the gas feed to the carbs comes into the front carb and feeds thru it to the back one, while some applications look neat and clean I was thinking that feeding into the back carb and going forward to the front would be an even cleaner application, does anyone know if this is doable or is there something that makes this idea a big no no. Thanks Cheers Brett.
|
||||||||||||||
| |||||||||||||||
| Posted: 03-29-2005 08:34 pm |
|
2nd Post |
|
Jim Ketcham Member
|
Hello Brett, You can run the fuel lines anyway you want as long as each carb is getting 2.5 psi of fuel pressure. I personally did not like the look of the overhead fuel line and ran mine via a "T" from below with an individual short line to each carb. I posted a pic in the JHP Photo Gallery in the hope it might help you visualize my description. Good luck with the Dellorto's. I think you will really enjoy them. Jim 
|
|||||||||||||
| ||||||||||||||
| Posted: 03-30-2005 12:13 am |
|
3rd Post |
|
Joseph Mazurk Member
|
Hey Brett, I, too installed mine through the middle. The same set-up as the Stroms. The only thing extra I had to do was cap the front of the front banjo. Using a rubber cap with a small hose clamp. Looks neat & clean. Joseph Mazurk Chicago, IL
|
||||||||||||||
| |||||||||||||||
| Posted: 03-30-2005 12:13 am |
|
4th Post |
|
Joseph Mazurk Member
|
Hey Brett, I, too installed mine through the middle. The same set-up as the Stroms. The only thing extra I had to do was cap the front of the front banjo. Using a rubber cap with a small hose clamp. Looks neat & clean. Joseph Mazurk Chicago, IL
|
|||||||||||||
| ||||||||||||||
| Posted: 03-30-2005 12:33 am |
|
5th Post |
|
Joseph Mazurk Member
|
Sorry about the repeat. Here is a pic of my set-up. Joseph Mazurk Chicago, IL Attachment: JH with dellortos 1.jpg (Downloaded 70 times)
|
||||||||||||||
| |||||||||||||||
| Posted: 03-30-2005 12:23 pm |
|
6th Post |
|
Brett Gibson JH5 20497 Member
|
Thanks for the replies guys I think I'll go that root and feed them from the back. Cheers Brett.
|
|||||||||||||
| ||||||||||||||
| Current time is 05:32 am | |
| > Jensen Healey & Jensen GT Tech > Carburetors > Dellorto Gas Feed Location | Top |
