Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Stromberg rebuild  Rate Topic 
AuthorPost
 Posted: 10-12-2018 01:27 am
  PM Quote Reply
1st Post
74beans
Member
 

Joined: 03-31-2018
Location:  
Posts: 11
Status: 
Offline
Has anyone found a good source for the "Thackeray" or "spring" washer used in carb. plate to intake manifold connection. Are the nuts just Nyloc or another type of lock-nut due to possible heat degradation. Half of my Thackery's were broken when I took off carbs to rebuild.

Back To Top PM Quote Reply  

 Posted: 10-12-2018 04:58 am
  PM Quote Reply
2nd Post
Tom Bradley
Member
 

Joined: 07-15-2013
Location:  
Posts: 203
Status: 
Offline
Thakery washers are available many places: the JHPS store, Moss motors, Ebay... Google it.

The original lock nuts on my car were metal. I don't think they had Nyloc back then. Nylock seems to work OK, though I think metal ones last longer. Metal ones seem to be harder to locate nowadays. McMaster-Carr has a good selection. https://www.mcmaster.com/locknuts

Back To Top PM Quote Reply

 Posted: 10-12-2018 10:18 pm
  PM Quote Reply
3rd Post
74beans
Member
 

Joined: 03-31-2018
Location:  
Posts: 11
Status: 
Offline
Thanks for quick reply. New to store and didn't look far enough. They are on the way.

Back To Top PM Quote Reply  

Current time is 10:08 pm  
> Jensen Healey & Jensen GT Tech > Carburetors > Stromberg rebuild Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems