Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Carburetors > alternative air cleaner

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
alternative air cleaner  Rate Topic 
AuthorPost
 Posted: 05-27-2017 10:20 pm
  PM Quote Reply
1st Post
allstateguy
Member


Joined: 01-29-2017
Location: Phoenix
Posts: 51
Status: 
Offline
Never liked the look of the stock airbox (too Hooverish) and I didn't like the look of the K&Ns that the car came to me with.

So I grabbed some spare aluminum sheet, some 5/16-18 button head screws, some trim, and a Subaru element from RockAuto and voila, for about $50 and a couple hours of time, I ended up with this . . .

Attachment: new air cleaner 2 5-26-17 small.jpg (Downloaded 108 times)

Back To Top PM Quote Reply  

 Posted: 05-27-2017 10:28 pm
  PM Quote Reply
2nd Post
allstateguy
Member


Joined: 01-29-2017
Location: Phoenix
Posts: 51
Status: 
Offline
don't know why I couldn't put two pix on the post, but here's the other one

Attachment: new air cleaner set up 1.jpg (Downloaded 105 times)

Back To Top PM Quote Reply

 Posted: 05-28-2017 12:40 am
  PM Quote Reply
3rd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 648
Status: 
Offline
Looks nice; just wondering why the carb. tops are 90 degrees from where they would normally be?

Back To Top PM Quote Reply  

 Posted: 05-28-2017 01:46 am
  PM Quote Reply
4th Post
allstateguy
Member


Joined: 01-29-2017
Location: Phoenix
Posts: 51
Status: 
Offline
I've only had the car for a few months and they were on it that way before I rebuilt them. I looked inside and didn't see how that position made a difference. The diaphragm tab is in the slot of the body.

Back To Top PM Quote Reply

 Posted: 05-28-2017 01:58 am
  PM Quote Reply
5th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 648
Status: 
Offline
If you pull the top off you will notice the 2 holes in the bottom of the piston; if they are closest to the butterfly, the response time for acceleration will be faster. You can "live" with the orientation in any of the 4 positions, but the response time (greatest "vacuum" or pressure differential) will be quickest in the 2 holes to the rear of the opening.

Back To Top PM Quote Reply  

 Posted: 05-28-2017 02:00 am
  PM Quote Reply
6th Post
allstateguy
Member


Joined: 01-29-2017
Location: Phoenix
Posts: 51
Status: 
Offline
Thank you!
As I was going to put in new needles tomorrow, I will put them back on in the correct direction.

Back To Top PM Quote Reply

Current time is 09:52 pm  
> Jensen Healey & Jensen GT Tech > Carburetors > alternative air cleaner Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems