Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Carburetors > AN fittings for 45 Dells

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
AN fittings for 45 Dells  Rate Topic 
AuthorPost
 Posted: 06-02-2010 03:50 pm
  PM Quote Reply
1st Post
JayDee24ca
Member
 

Joined: 10-07-2009
Location:  
Posts: 7
Status: 
Offline
 I want to replace the rubber fuel lines on these 45s with braided line and AN fittings, but I am unfamiliar with the sizing criteria of both fittings and line. Can someone who has done this please tell me what parts I will need to purchase? As everything I need will be mail order, specifying the wrong part size to the supplier will be time consuming and expensive for me.

Thanks

J Dymond
Back To Top PM Quote Reply  

 Posted: 06-02-2010 07:16 pm
  PM Quote Reply
2nd Post
Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
 I don't recommend the braided fuel lines and AN fittings, I've seen and heard of a lot or fires and close calls on the 907 based on fuel leaks from those. When they fail, which is at a very high rate and much more often than any regular fuel hose, they will not give you any warning. The proximity of a leaking fitting to the distributor is not good.
Back To Top PM Quote Reply

 Posted: 06-03-2010 05:11 am
  PM Quote Reply
3rd Post
JayDee24ca
Member
 

Joined: 10-07-2009
Location:  
Posts: 7
Status: 
Offline
 Thanks Greg;

You are not the first person that has pushed back when I have said I want to use this line and fittings on the car. I guess I should listen to good advice! So if I want to dress it up a bit, can you recommend anything other than hose clamps and rubber line? Or is keeping to the regular stuff the safest bet...

John D
Back To Top PM Quote Reply  

 Posted: 06-03-2010 02:38 pm
  PM Quote Reply
4th Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
 John, auto speed shops have a fake SS covering that can slip over regular gas hose and comes with a nut like cover that goes over the hose clamp.

Brett
Back To Top PM Quote Reply

 Posted: 06-03-2010 10:37 pm
  PM Quote Reply
5th Post
Steve Johnson
Member


Joined: 03-15-2005
Location: Santa Ana, California USA
Posts: 24
Status: 
Offline
 Here is picture of what I have done.

 

Steve

Attachment: 86865276_LuYG6y4q.jpg (Downloaded 92 times)
Back To Top PM Quote Reply  

 Posted: 06-04-2010 04:45 am
  PM Quote Reply
6th Post
JayDee24ca
Member
 

Joined: 10-07-2009
Location:  
Posts: 7
Status: 
Offline
 Yeah! So that is what I am looking for! Are those not AN and braided line? If not, what is it?

JD
Back To Top PM Quote Reply

Current time is 10:30 pm  
> Jensen Healey & Jensen GT Tech > Carburetors > AN fittings for 45 Dells Top


UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems