| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Velo stacks, 45mm Dels | Rating: 
|
| Author | Post |
|---|
| Posted: 10-08-2009 09:20 pm |
|
1st Post |
|
JayDee24ca Member
|
Folks; Where can I find reasonably priced but decent quality 25-30mm depth velo stacks for my Dellorto 45s? I don't really want anything from Bejiing, but I don't want to spend hundreds of dollars on a billet-turned full-bell specialty set either. I looked at the ones avaialble at CB Performance, but the depth is all wrong; I am limited to 25-30mm (around one inch). Thanks J Dymond
|
||||||||||||||
| |||||||||||||||
| Posted: 10-08-2009 09:55 pm |
|
2nd Post |
|
subwoofer Member
|
Give Mike at Lotusbits a call. 40£ for a set (used). I would recommend calling rather than email. http://www.lotusbits.com
|
|||||||||||||
| ||||||||||||||
| Posted: 10-10-2009 01:30 pm |
|
3rd Post |
|
subwoofer Member
|
Just stumbled across these guys: QED They have 13mm trumpets for the same price as 43mm. I don't think the shorter trumpets should change max power RPM much, it is still a very small part of the total runner length.
|
||||||||||||||
| |||||||||||||||
| Posted: 10-11-2009 09:29 pm |
|
4th Post |
|
JayDee24ca Member
|
Hi I tried the QED site, and they don't advertise the correct height for my application. The stacks i need are 45mm X 25mm to 45 X 30mm, due to air breather limitations. Unfortuanatley it is not as easy as simply getting a larger breather, as I am again limited to a small space for the breather itself. You are corerct that the trumpet is only a small part of the overall breather passage, however the abiltiy to draw air from the sides (and even from below the lip) of the trumpet is important to good induction. A 13mm horn is just too close to the breather backing plate to give proper flow. I also had a look at the Lotusbits wesite. I did not give him a call however, as I am in Northern Canada and he is across the puddle. I emailed him, but as you indicated, he is not very responsive to that mode of communication. I appreciate your help in this, and hope I can come up with a solution. I may wind up just buying from CB Performance I guess. JD
|
|||||||||||||
| ||||||||||||||
| Posted: 10-15-2009 01:57 am |
|
5th Post |
|
Jensen Healey Super Moderator 
|
It seems you should contact Eurocarb at http://www.dellorto.com and lock in the price before the dollar slips lower. Kurt
|
||||||||||||||
| |||||||||||||||
| Posted: 10-15-2009 04:12 am |
|
6th Post |
|
JayDee24ca Member
|
Thanks Kurt I have been in contact with them. They seem to have what I need. JD
|
|||||||||||||
| ||||||||||||||
| Current time is 11:01 pm | |
| > Jensen Healey & Jensen GT Tech > Carburetors > Velo stacks, 45mm Dels | Top |
