| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Center Console Radiating Heat | Rate Topic |
| Author | Post |
|---|
| Posted: 07-25-2008 09:55 pm |
|
1st Post |
|
dancarlsen Member
|
Maybe this is a stupid question and the answer will be "Welcome to driving Jensen Healeys!" but I'll give it a go anyway. I have my first JH for a couple months now and it seems like the air vents and the center console are just constantly throwing off a lot of heat. I don't even turn on the fan because it just blows hot air. The sleeves on the shifter and emergency brake also blow out heat. This would be a great car in the winter - i would never get cold. Unfortunately this is Minnesota so I will NEVER drive it then. Is this just something that comes with the territory or a symptom of something else? Thanks, Dan in Minneapolis
|
||||||||||||||
| |||||||||||||||
| Posted: 07-25-2008 10:07 pm |
|
2nd Post |
|
JodyFKerr Member 
|
Dan, I'm going to take a wild guess and say that you've got one of the earlier JH's that don't have the heater vacuum switch or you do have one and it's broken. In addition, it sounds like the heater vents are semi-open all the time. Most likely because the adding that seals them is worn out. Now, the nice thing is that this is all fixable. Check under the hood for the heater valve to see if you have one and get back to us. Also, worst case scenario you can undo the heater pipes and insert a bypass so that coolant doesn't go througthe heater core.
|
|||||||||||||
| ||||||||||||||
| Posted: 07-25-2008 10:10 pm |
|
3rd Post |
|
dancarlsen Member
|
JodyFKerr wrote: Dan, It's a 1974 1/2 - don't know if that's what you mean by "earlier JH's" or not. The rest of your suggestions I will (hopefully) check out this weekend. Thanks, Dan
|
||||||||||||||
| |||||||||||||||
| Posted: 07-25-2008 10:29 pm |
|
4th Post |
|
Jensen Healey Super Moderator 
|
You seem to have two issues. Heater won't shut off: Do what Jody said. Check the rubber seal at the firewall to hood area around the air intake screen. Last resort: remove the heater hoses and connect them together. Enjoy the rest of the summer. Hot shifting: There is a ring that is attached with sheetmetal screws that secures an inner boot for the shift lever. Remove the shifter console to find it. I used the corner of a Ziplock bag leaving enough slack so as not to limit the shifter travel. Attach with a rubber band to the shifter. This will last about 5000 miles. Cover the tunnel with some kind of insulation, even carpet padding is better than nothing. JC Whitney has a suitable bulk product. Kurt http://www.jcwhitney.com/autoparts/ItemBrowse/c-10101/s-10101/p-100000328424/mediaCode-ZX/appId-100000328424/Pr-p_CATENTRY_ID:100000328424
|
|||||||||||||
| ||||||||||||||
| Posted: 07-25-2008 10:37 pm |
|
5th Post |
|
JodyFKerr Member
|
Dan, Then you've got one of the cars that didn't come with the inline switch. Considering how fast the MN summer dissapears I suggest doing the bypass for now so that you'll be able to enjoy your summer. And you can add the following to your winter to-do list: http://www.theymightberacing.com/Projects/FrameOff/JH74G/HeaterAssemblyRestoration.aspx Jody
|
||||||||||||||
| |||||||||||||||
| Posted: 07-25-2008 10:56 pm |
|
6th Post |
|
John Finch Member
|
You could also install a valve in the supply side heater hose located in the engine compartment if there is room. When closed this will prevent hot coolant from reaching your heater core thereby preventing heat transfer. You can easily open it up to drive in the spring/fall as required. The PO of 18309 installed one in the downstream return hose, replacing the stock vaccum valve. This works great for me. I am also in Mpls and have driven into Nov as long as there is no snow/salt etc. Just another option. Best of luck John
|
|||||||||||||
| ||||||||||||||
| Posted: 08-26-2008 07:24 pm |
|
7th Post |
|
12371 Member
|
Dan; I had the same problem with heat-a lot of it-coming out of the console. The company I work for makes industrial generator & kitchen exhaust so I got a hold of a 1" ceramic blanket and cut it to the profile of the bottom of the console and viola, my right shirt sleeve doesn't catch fire any more. If you want to go to that extreme any commercial kitchen sheet metal contractor has it. It is basically what they use to wrap grease ducts above kitchen hoods. There are 3 major brands, 3M, Thermal Ceramics, and Unifrax. I'm sure that there are many things you could use but if you want to go to the effort, this stuff really works. George 12371
|
||||||||||||||
| |||||||||||||||
| Current time is 08:11 am | |
| > Jensen Healey & Jensen GT Tech > Cooling > Center Console Radiating Heat | Top |
