| ||||
Moderated by: Greg Fletcher |
|
JH5 Clutch Dimensions | Rating: |
Author | Post |
---|
Posted: 12-31-2007 02:45 pm |
|
1st Post |
Jensenman Member
|
I have found a Toyota Supra 5 speed box and located an Excel bellhousing, putting me well on the way to the Toyota 5 speed swap in my 1974 JH5. I have a dumb question: I realize the Toyota input shaft is way different than the Getrag that's coming out, meaning I'll have to go with a different disc. The Supra disc is 8 7/8" OD, 21 x 1 1/8" spline. The dumb question: what is the OD of the original J-H clutch disc for the Getrag cars? I *think* it's 8 1/2". I'd like to find out before I have to pull the gearbox out.
|
||||||||||||||
|
Posted: 12-31-2007 04:08 pm |
|
2nd Post |
Judson Manning Member
|
We chatted about this some time ago: http://www.jensenhealey.com/forums/view_topic.php?id=498&forum_id=2
|
|||||||||||||
|
Posted: 12-31-2007 07:29 pm |
|
3rd Post |
Jensenman Member
|
Very good information. Can you tell me who made the clutch disc you used?
|
||||||||||||||
|
Posted: 04-18-2008 12:33 am |
|
4th Post |
Jensenman Member
|
As it turns out, after getting some outrageous quotes around the nation for a custom 8 1/2" disc, I decided to go a different route. I had a local machine shop drill and tap my flywheel to accept a Toyota Celica (not Supra) 8 7/8" pressure plate. That means I can use the easily available Toyota disc. My car's tranny swap has been completed (except for speedometer calibration) and the car is being driven.
|
|||||||||||||
|
Posted: 04-21-2008 03:53 pm |
|
5th Post |
pbahr Member
|
Is this beauty going to show up at the Nationals in Watkins Glen. This is going to be a fantastic event, including a few laps around the racetrack, and a presentation by the Watkins Glen official historian. I maintain that this will be the best East National ever ! ! ! Pete Bahr
|
||||||||||||||
|
Current time is 01:41 am | |
> Jensen Healey & Jensen GT Tech > Engine & Transmission > JH5 Clutch Dimensions | Top |