Brett Gibson JH5 20497
Member
|
As I'm getting ready to take my JH out, doing a little tune up, changing the cam belt etc; I thought I'd change the plugs at the same time, not having a plug out just yet I looked thru my info on what NGK plug I needed and found a post from Mark R. listing it as BP7ES, then I notice as I'm mucking about in the garage that I have a spare set of plugs that are BP6ES, so now I'm figuring for some reason I have a "lower heat range" plug, or maybe a "higher heat range" one, so let me get on the internet and see just whats - what, and thats were I bumped into this site
http://www.ngksparkplugs.com/techinfo/spark_plugs/techtips.asp?nav=31000&country=US
Turns out a spark plug puts out the same temp, and it's how fast a heat sink the plug is that determines heat range, if it's slow to disapate heat then it's a "Hot" plug keeping the cylinder area "Hotter", and visa versa, if it disapates heat faster, it's a cooler plug, anyhow check this site out its pretty informative.
All this time I thought a hot plug just gave a bigger hotter spark, now I know they are just Heat Sink's, you'all probably knew this already so I apollogize if this comes as old news, but I thought it enlightning.
Thanks, Brett.
|
