| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| clutch fork | Rate Topic |
| Author | Post |
|---|
| Posted: 11-25-2022 02:01 pm |
|
1st Post |
|
Bfitz241 Member 
|
Do the four speed and five speed use the same clutch fork? thanks
|
||||||||||||||
| |||||||||||||||
| Posted: 02-20-2023 11:30 pm |
|
2nd Post |
|
Darth V8R Member 
|
Bfitz241 wrote: Do the four speed and five speed use the same clutch fork? Yes. Part number 91688. Get the parts catalog(ue) from Martin Robey. You can look up the part and see that both transmissions have the same part number for their respective clutch forks. Ergo, they use the same fork. Vance Last edited on 02-22-2023 05:30 pm by Darth V8R |
|||||||||||||
| ||||||||||||||
| Posted: 02-21-2023 11:25 pm |
|
3rd Post |
|
Brett Gibson JH5 20497 Member
|
The fork pivot is different between the two if you go with part numbers, I don’t have access to the shifting forks right now and won’t for a few weeks but I’m almost positive that there is a difference with the forks as well, I believe the 5 speed is shorter. Not trying to cause a problem here but I think it needs a bit more input. Brett
|
||||||||||||||
| |||||||||||||||
| Posted: 02-22-2023 05:23 pm |
|
4th Post |
|
Darth V8R Member
|
Brett Gibson JH5 20497 wrote: The fork pivot is different between the two if you go with part numbers, I don’t have access to the shifting forks right now and won’t for a few weeks but I’m almost positive that there is a difference with the forks as well, I believe the 5 speed is shorter Not trying to cause a problem here but I think it needs a bit more input. The forks are identical according to the parts catalog part numbers and illustrations. However, you are correct that the fulcrum pins are different (once again, according to the parts catalog). The pin part numbers are different, and the fulcrum pin for the 5 speed is shorter that the 4 speed's in the relevant diagrams. Vance Last edited on 02-22-2023 05:23 pm by Darth V8R |
|||||||||||||
| ||||||||||||||
| Posted: 02-22-2023 05:44 pm |
|
5th Post |
|
redracer Member
|
Hey gang: just looked at my stock and they are the same. The main diff is the fulcrum stud for the 2 different bell housings.
|
||||||||||||||
| |||||||||||||||
| Posted: 02-22-2023 08:19 pm |
|
6th Post |
|
Brett Gibson JH5 20497 Member
|
Thanks for clearing that up Bruce, I was confusing the fork and pivot. Brett
|
|||||||||||||
| ||||||||||||||
| Posted: 05-12-2023 02:34 am |
|
7th Post |
|
Bfitz241 Member
|
Thanks for the info.
|
||||||||||||||
| |||||||||||||||
| Current time is 05:47 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > clutch fork | Top |
