Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Jensen GT Engine  Rate Topic 
AuthorPost
 Posted: 07-24-2022 07:35 pm
  PM Quote Reply
1st Post
Jensen GT
Member


Joined: 07-10-2013
Location: Hildesheim, Germany
Posts: 87
Status: 
Offline
Does a 1979 Lotus Eclat engine fit 100% in a Jensen GT?

Back To Top PM Quote Reply  

 Posted: 04-22-2023 05:14 am
  PM Quote Reply
2nd Post
Esprit2
Member
 

Joined: 05-01-2005
Location: Minneapolis, Minnesota USA
Posts: 575
Status: 
Offline
A little late, but...

A Lotus 2.0 Litre 907 will bolt into both a Jensen GT and a Jensen-Healey.

The later Lotus 2.2 Litre 912LC & 912HC have a wider Main Bearing Panel and sump, and require that the right side of the chassis' sub-frame be notched (cut & weld) where the cross-member meets the right side upright (at the elbow).

Last edited on 05-05-2023 01:31 am by Esprit2

Back To Top PM Quote Reply

Current time is 05:20 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Jensen GT Engine Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems