Early MkI Cam Belt Tensioner Adjustment Tool Substitute - Engine & Transmission

> Jensen Healey & Jensen GT Tech > Engine & Transmission > Early MkI Cam Belt Tensioner Adjustment Tool Substitute

Author

Post

Joined:	10-05-2021
Location:	New Jersey USA
Posts:	51
Status:	Offline

Hi -

I looked around to see if I could find a cam belt tensioner tool and found this on Amazon:

https://www.amazon.com/dp/B07G2CW7N7?ref=ppx_pop_mob_ap_share

I cut the end out of the "non-drilled end" and it fits the 38mm cam tensioner adjuster really well.

Just wanted to pass this along.

Mark

Esprit2
Member

Joined:	05-01-2005
Location:	Minneapolis, Minnesota USA
Posts:	575
Status:	Offline

Interesting. I always like more legitimate tool options.

Another option is a crows-foot, along with an extension and ratchet handle. Most automotive/ industrial versions are too thick, but one meant for working on bicycles is more appropriate.

Regards,
Tim Engel

WhatsUpDOHC
Member

Joined:	10-05-2021
Location:	New Jersey USA
Posts:	51
Status:	Offline

Esprit2 wrote:
Interesting. I always like more legitimate tool options.

Another option is a crows-foot, along with an extension and ratchet handle. Most automotive/ industrial versions are too thick, but one meant for working on bicycles is more appropriate.

Regards,
Tim Engel

Thanks Tim! I looked all over for 38mm crows-foot and a bicycle wrench (Checked Parks Tool and other sources in addition to Amazon) but I couldn't find anything.