Barthol
Member
| Joined: | 10-31-2013 |
| Location: | Denmark |
| Posts: | 67 |
| Status: |
Offline
|
|
Hi,
I have changed my clutch and have now assembled the gearbox to the engine.
My concern is with regard to the clutch release arm.
Without the tension from the cable I am able to move the arm out from the pivot on which it is attached with the clip.
The clip looks ok , and it worked fine last summer.
But my concern is ,Will it come loose when i am driving the car ?
Is the clip supposed to hold the arm firm to the pivot or is it held in place by the forces from the cable , clutch cover plate etc.
I would hate to put the engine back in the car just to experience that I have to tak it out again.
Any experience is welcome
kim
|
