| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| CNC porting the 907 head | Rating: 
|
| Author | Post |
|---|
| Posted: 06-12-2014 10:28 pm |
|
1st Post |
|
roverman Member
|
I spoke to "Richard", this am., about the possibility of writing a cnc. program, to port these, and possibly 910-920 Lotus heads ? Currently, the volume is not there, to justify. "IF",enough interest could be generated between JHPS and Lotus customers, this would save all concerned time/money, for a more consistant finished product. I will be needing (2) such heads, for my build, but to make this work, will take genuine request, for cnc porting of customers heads. Perhaps a "request list ". I have NO affiliation with Richard, for this consideration. Cheers, Art G.
|
||||||||||||||
| |||||||||||||||
| Posted: 06-13-2014 09:19 am |
|
2nd Post |
|
subwoofer Member
|
You are aware that Lotusbits already have CNC ported heads, and judging by the dyno plots they are not useless. 280+ BHP from a 2.5l isn't bad... CNC porting in itself makes no difference in performance to a hand ported head, the advantage comes in the form of repeatability. Once you have a good port you can replicate it infinitely. -- Joachim
|
|||||||||||||
| ||||||||||||||
| Posted: 06-13-2014 04:05 pm |
|
3rd Post |
|
roverman Member
|
"for a more consistant finished product" Competition is good. I like competition. I checked Lotusbits pricing, currently $2,053, plus vat and roud trip ship. No flow spec's and they don't specify oversize valves. Cheers, roverman. Last edited on 06-13-2014 11:40 pm by roverman |
||||||||||||||
| |||||||||||||||
| Posted: 07-21-2014 01:06 pm |
|
4th Post |
|
jamescheesewright Member
|
I've just got my Cnc ported head back from Gary Kemp in the UK. Anyway I told him of the lotus bit heads and I also told him of the mob I found in North Hampton who have a 907 CNC ported head on their web site. Turns out the North Hampton guys are ex f1 engineers of ilmor racing. And have set up a company that specialise in CNC ported heads modelled in computational fluid dynamics (cfd) anyway after conversations I arranged for a head I bought in the uk through a mate in London to be shipped to Garry for inspection. He then shipped it to the guys in Northhampton who then fitted Garry's oversize race valves inlet and exhaust plus new valve seats ( as the valve spec is so much larger that you can not simply recut the existing seat) then the carried out the CNC porting. Then they installed the new guides ( supplied by Gary) then they carried out a CNC multi angle valve seat cut. All modelled then flow benched to prove the model at various lifts. But costly. For the money I could have purchased a billet steel 2.2 crank from QED. But all for the love of my 907!
|
|||||||||||||
| ||||||||||||||
| Current time is 04:56 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > CNC porting the 907 head | Top |
