| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| how do I check my oil pump. | Rating: 
|
| Author | Post |
|---|
| Posted: 06-04-2014 03:34 pm |
|
1st Post |
|
Barthol Member
|
Rebuilding my engine i mount what is supposed to be a freshly rebuild oil pump. When mounted I decided to spin it using my cordless drill. I spinned for 4 minutes at 1300 rpm without the it being able to build up pressure. is the 1300 rpm to little ? I guess that it only corresponds to 650 engine rpm. After this I put the pump in a vice and tried to measure the vacum with a vacuum gauge on a rubber flange. At 1300 rpm it only produced 10 mbar of vacuum. Is there a trio to start up a rebuild pump or could there be something wrong with it? Br Kim
|
||||||||||||||
| |||||||||||||||
| Posted: 06-04-2014 05:55 pm |
|
2nd Post |
|
Barthol Member
|
Problem Solved. I mounted the distributor and the oil pressure came immediately. So now I learned it - No distributor-> no oil pressure :-( I will go and mop up the oil now. BR Kim
|
|||||||||||||
| ||||||||||||||
| Posted: 06-05-2014 05:28 pm |
|
3rd Post |
|
Frank Schwartz Member
|
Ah, Ha !!!
|
||||||||||||||
| |||||||||||||||
| Posted: 06-05-2014 08:58 pm |
|
4th Post |
|
gmgiltd Member
|
This explains it well http://img51.imageshack.us/img51/1961/nzxk.jpg
|
|||||||||||||
| ||||||||||||||
| Current time is 06:02 pm | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > how do I check my oil pump. | Top |
