| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Oil dip stick pipe | Rate Topic |
| Author | Post |
|---|
| Posted: 06-03-2014 03:44 pm |
|
1st Post |
|
Barthol Member
|
Hi Guys, I am about to mount my new oil pan to my 2.2 907 engine. The oil pan is a lotus one modified to fit a JH. My problem is that I need to fix the pipe for the oil dip stick into the oil sump . Anyone who knows how to do this in order to make sure that it stays in place during driving. I would hate for it to come loose as it obviously would create a big oil mess :-( Br Kim Attachment: Lotusparts oil sump front right.jpg (Downloaded 65 times)
|
||||||||||||||
| |||||||||||||||
| Posted: 06-03-2014 10:18 pm |
|
2nd Post |
|
Art DeKneef Member
|
When I cleaned and repaired my oil pan I adjusted the metal on the dipstick pipe to be snug and then used a sealer to both hold it in place and help seal it from leaking. Art
|
|||||||||||||
| ||||||||||||||
| Current time is 06:48 pm | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > Oil dip stick pipe | Top |
