| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| timing | Rating: 
|
| Author | Post |
|---|
| Posted: 10-11-2012 05:47 am |
|
1st Post |
|
jarnol123 Member
|
Really need help...anyone help me set timing and get my jh running.. live in cave creek az...tried to do it manually but can't get it set correctly...any help would be appreciated
|
||||||||||||||
| |||||||||||||||
| Posted: 10-11-2012 02:34 pm |
|
2nd Post |
|
Brett Gibson JH5 20497 Member
|
Ok here's a quicky of what to set your engine up to. set the crank to TDC aligning the marks up. (make sure #1 piston is at the top) align the cam pulleys up at 110 each. align the distributor up so the rotor is pointing at the #1 cap wire. make sure all the wires are clean/ plugs / coil / etc, (dirt will kill a contact.) if you have 2 to 4 pounds fuel pressure and the rest of the engine is decent. carbs / compression etc it should start. Sometimes if you have issues try cranking the engine over in a dark area and watch to see if you get sparking in places that should'nt be. Brett
|
|||||||||||||
| ||||||||||||||
| Posted: 10-11-2012 07:39 pm |
|
3rd Post |
|
jarnol123 Member
|
thks brett..one question...not familiar with cam pulleys..how do you do that step?
|
||||||||||||||
| |||||||||||||||
| Posted: 10-12-2012 02:51 pm |
|
4th Post |
|
Brett Gibson JH5 20497 Member
|
Well hopefully when you align things the cam marks will line up and you dont need to touch them, but if you have to it requires loosening the timing belt so you can turn the cams independantly. I have a picture of the cam gears that show the marks, if you need it send me a private message with your e-mail and I will get it to you. Brett PS, I am talking a small adjustment here, if the cams require a major turn to line them up thats a whole nother ball game.
|
|||||||||||||
| ||||||||||||||
| Posted: 10-20-2012 03:55 am |
|
5th Post |
|
redracer Member
|
Don't know if you got the timing issue solved yet from Brett, but not I would be happy to help. Do you have a webcam? would make things easier. bruce madden, redracer
|
||||||||||||||
| |||||||||||||||
| Current time is 07:38 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > timing | Top |
