| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Pilot Bearing | Rate Topic |
| Author | Post |
|---|
| Posted: 01-14-2012 09:48 pm |
|
1st Post |
|
Bob Clark Member
|
I am wondering what methods others have used to remove the pilot bearing. Any help would be greatly appreciated.
|
||||||||||||||
| |||||||||||||||
| Posted: 01-15-2012 01:39 am |
|
2nd Post |
|
Jensen Healey Super Moderator 
|
Mine was trashed so I used a small screwdriver and a hammer.
|
|||||||||||||
| ||||||||||||||
| Posted: 01-15-2012 01:50 am |
|
3rd Post |
|
Bob Clark Member
|
Mine is in fairly good shape. Just replacing it since I am in there and I have no idea of when it was replaced last. Thanks for the info. If it comes to that I will get that hammer and screw driver out.
|
||||||||||||||
| |||||||||||||||
| Posted: 01-15-2012 09:23 am |
|
4th Post |
|
sholdowa Member 
|
Wet paper... http://www.yotatech.com/f128/pilot-bearing-removal-how-video-186422/
|
|||||||||||||
| ||||||||||||||
| Posted: 01-15-2012 01:44 pm |
|
5th Post |
|
carl.bedlington Member
|
I removed mine very easily and without damaging it using the grease method this youtube link shows the method but infact the video makes it look harder than it actually is Mine pushed out with the first tap. http://www.youtube.com/watch?v=WSGD9UuI5-I
|
||||||||||||||
| |||||||||||||||
| Posted: 01-15-2012 05:07 pm |
|
6th Post |
|
pbahr Member 
|
Well, this is a much better grease method explanation: http://www.youtube.com/watch?v=uPj2eZ7Eofs&feature=endscreen&NR=1 Pete Bahr YELODOG
|
|||||||||||||
| ||||||||||||||
| Posted: 01-15-2012 11:35 pm |
|
7th Post |
|
Bob Clark Member
|
Got the pilot bearing out. Used the grease method. First using a ball pein hammer and being a little timid which didn't work. Then used a small sledge hammer with some power and it came right out. Took about half a dozen hits, filling the hole with grease between each whack. Not difficult. New one tapped in with piece of wood until it was level, then final seating with a 9/16" deep socket.
|
||||||||||||||
| |||||||||||||||
| Current time is 10:55 pm | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > Pilot Bearing | Top |
