| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Tricks for getting the sump off? | Rate Topic |
| Author | Post |
|---|
| Posted: 03-28-2010 12:13 am |
|
1st Post |
|
subwoofer Member
|
I have to swap sumps on the two engines, since the Eclat sump interferes with the cross member. I got one off easily, but the one from the old engine is like welded on. Are there any tricks to getting the sump to let go? I really don't want to break it... -- Joachim
|
||||||||||||||
| |||||||||||||||
| Posted: 03-28-2010 01:54 pm |
|
2nd Post |
|
subwoofer Member
|
Got it. Used a pipe for leverage, pressing down on the front left corner of the oil pan and using one of the bellhousing mounts as a counterhold. Took quite a bit of force, but I figured that as long as force wasn't applied in form of a shock or blow, material strength should be more than high enough. Now only remains to modify the baffles, since the Eclat pickup is 2" further back than the JH pickup - so it interferes with the JH baffles. Swapping pickups means having to do quite a bit of work over again - in addition to waiting for parts. -- Joachim
|
|||||||||||||
| ||||||||||||||
| Current time is 06:44 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > Tricks for getting the sump off? | Top |
