| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Fresh Air Vent | Rate Topic |
| Author | Post |
|---|
| Posted: 01-17-2014 12:37 pm |
|
1st Post |
|
roland11a Member
|
Hi All I know this is a long shot, but i'm trying to get a Flap - air vent assembly or more especialy the spring steel retaining catch. I had to doner cars and all bit one had snapped of of rusted away The Flap - air vent assembly is the fresh air vent flap in the footwell, one each side of the centre tunnel. If any one has one on a doner car thats spare i could have, that would be great. Jensen part Number - 91763 Thanks Roland Attachment: Air flap assembly.jpg (Downloaded 112 times) Last edited on 01-17-2014 01:01 pm by roland11a |
||||||||||||||
| |||||||||||||||
| Posted: 01-17-2014 02:50 pm |
|
2nd Post |
|
Brett Gibson JH5 20497 Member
|
Roland what you need is a piece of spring steel and bend it into shap, or another method would be to use a cabinet magnet, personally I would go with the magnet that way it does not matter if you over pull the flap you wont bend any metal and have to fav about trying to get it back up plus with the magnet the flap opens further for more air. Brett
|
|||||||||||||
| ||||||||||||||
| Posted: 01-18-2014 01:10 am |
|
3rd Post |
|
roland11a Member
|
Just be nice to have the correct part. Opening to far is not a problem as there are additional stops. having said that we don't usually need a lot of fresh air in the UK is more use to have a good heater Thanks for the idea's
|
||||||||||||||
| |||||||||||||||
| Posted: 01-27-2014 08:18 pm |
|
4th Post |
|
roland11a Member
|
Sorted now, had a flash of inspiration. I used a strip of metal banding that usually holds building materials onto pallets and bent it into shape. Its just the right size and has got a lot more spring to it than mild steel
|
|||||||||||||
| ||||||||||||||
| Posted: 01-28-2014 12:23 am |
|
5th Post |
|
DDrake Member
|
What a great idea ! I have just fabricated a new vent for the drivers side and was wondering how to accomplish this
|
||||||||||||||
| |||||||||||||||
| Current time is 05:33 pm | |
| > Jensen Healey & Jensen GT Tech > Projects > Fresh Air Vent | Top |
