MK1 Lug nut size and or source for a replament set - Wheels

> Jensen Healey & Jensen GT Tech > Wheels > MK1 Lug nut size and or source for a replament set

Author

Post

Joined:	04-21-2016
Location:	Hard-times MS
Posts:	24
Status:	Offline

Does anyone know the thread size/pitch for the MK1 lug nuts? any listed sources for replacement - Aluminum Lug nuts?

Thanks!

redracer
Member

Joined:	09-10-2012
Location:	BROOKHAVEN, Georgia USA
Posts:	654
Status:	Offline

the threads are 7/16" X 20 threads/inch(the "fine" size for 7/16" bolts). The lug nuts(aluminum) have a tapered raised edge near the shoulder to allow for centering of the wheel(always loosely tighten the 4 nuts to center the wheel before using the torque wrench).
If you need extra nuts, I have plenty.(eventually I'll get a bunch powder coated for longer lasting "beauty")

JH73
Member

Joined:	06-28-2018
Location:
Posts:	10
Status:	Offline

I would like to buy some lug nuts from you....I need 16...How much?
501-204-9512.

JH73
Member

Joined:	06-28-2018
Location:
Posts:	10
Status:	Offline

How much torque on the wheel nuts?

Sander
Member

Joined:	03-15-2005
Location:	Peachtree Corners, Georgia USA
Posts:	111
Status:	Offline

I believe it's 55

Esprit2
Member

Joined:	05-01-2005
Location:	Minneapolis, Minnesota USA
Posts:	575
Status:	Offline

The Workshop Manual says 51 Lbs-ft (7.05 Kg-m).