Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Seats  Rate Topic 
AuthorPost
 Posted: 01-09-2007 05:15 am
  PM Quote Reply
1st Post
Pat Connor
Member


Joined: 03-12-2005
Location: San Dimas, California USA
Posts: 21
Status: 
Offline
Has any one found satisfactory replacement seats for the Jensen_Healey.  Most seats seem to be too wide. My seat frames are worn out and the backs will not hold there position.

Back To Top PM Quote Reply  

 Posted: 01-09-2007 05:37 pm
  PM Quote Reply
2nd Post
Judson Manning
Member


Joined: 03-14-2005
Location: Atlanta, Georgia USA
Posts: 406
Status: 
Offline
Pat,

There is a thead on the old board about this....somwhere...

Some common options that fit include the Nissan 240SX, Toyota Supra, Mazda Miata and Pontiac Fiero.  I went with the late  240SX seats with separate headrest and large side bolsters.

Judson

Back To Top PM Quote Reply

 Posted: 01-10-2007 01:53 am
  PM Quote Reply
3rd Post
Pat Connor
Member


Joined: 03-12-2005
Location: San Dimas, California USA
Posts: 21
Status: 
Offline
What was required to install the seats?

Back To Top PM Quote Reply  

 Posted: 01-10-2007 02:48 am
  PM Quote Reply
4th Post
CMacksey
Member
 

Joined: 01-06-2007
Location:  
Posts: 12
Status: 
Offline
Pat Connor wrote: What was required to install the seats?

You'll need to get brackets, most likely custom, or modify the ones that come with the car seats you take from other cars...

Measure out the demensions of the area and you can search aftermarket car seats, that is if you're someone who likes them.

Back To Top PM Quote Reply

 Posted: 01-10-2007 03:41 pm
  PM Quote Reply
5th Post
Judson Manning
Member


Joined: 03-14-2005
Location: Atlanta, Georgia USA
Posts: 406
Status: 
Offline
Pat,

The sad fact is that no two seats mount the same.  This really isn't a bolt-in solution, more like a total renovation project for  your interior.

I had to custom fabricate mounts for the brackets I had to modify from the 240SX.  If they are like mine, chances are your floor-boards and x-members will need to be replaced/reinforced/rebuilt anyway.

The 'good' news is that this was a perfect time to put in carpet that matched the seats I chose.  Those with more funds can have the seats recovered in leather to make for a fairly high-end interior.

Judson

Back To Top PM Quote Reply  

Current time is 09:03 am  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Seats Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems