| ||||
Moderated by: Greg Fletcher |
|
Seats | Rate Topic |
Author | Post |
---|
Posted: 01-09-2007 05:15 am |
|
1st Post |
Pat Connor Member
|
Has any one found satisfactory replacement seats for the Jensen_Healey. Most seats seem to be too wide. My seat frames are worn out and the backs will not hold there position.
|
||||||||||||||
|
Posted: 01-09-2007 05:37 pm |
|
2nd Post |
Judson Manning Member
|
Pat, There is a thead on the old board about this....somwhere... Some common options that fit include the Nissan 240SX, Toyota Supra, Mazda Miata and Pontiac Fiero. I went with the late 240SX seats with separate headrest and large side bolsters. Judson
|
|||||||||||||
|
Posted: 01-10-2007 01:53 am |
|
3rd Post |
Pat Connor Member
|
What was required to install the seats?
|
||||||||||||||
|
Posted: 01-10-2007 02:48 am |
|
4th Post |
CMacksey Member
|
Pat Connor wrote: What was required to install the seats? You'll need to get brackets, most likely custom, or modify the ones that come with the car seats you take from other cars... Measure out the demensions of the area and you can search aftermarket car seats, that is if you're someone who likes them.
|
|||||||||||||
|
Posted: 01-10-2007 03:41 pm |
|
5th Post |
Judson Manning Member
|
Pat, The sad fact is that no two seats mount the same. This really isn't a bolt-in solution, more like a total renovation project for your interior. I had to custom fabricate mounts for the brackets I had to modify from the 240SX. If they are like mine, chances are your floor-boards and x-members will need to be replaced/reinforced/rebuilt anyway. The 'good' news is that this was a perfect time to put in carpet that matched the seats I chose. Those with more funds can have the seats recovered in leather to make for a fairly high-end interior. Judson
|
||||||||||||||
|
Current time is 05:45 am | |
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Seats | Top |