| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Soft Top Water Leaks | Rate Topic |
| Author | Post |
|---|
| Posted: 04-04-2006 05:55 am |
|
1st Post |
|
Frank Schwartz Guest
|
I wonder if anyone has used and installed, or has a kit that was featured in the Jensen Bulletin J/H 73-12 for supposedly curing the leaks in the top fittings. The kit is Part #94029. I have the Service Bulletin with the instructions afd list of parts and possibly could fabricate the parts if I had more information, etc. Picture #4 in the copy I have is very poor and if anyone has a good copy of this particular drawing it would be a great help as well. Thanks.....
|
||||||||||||||
| |||||||||||||||
| Posted: 04-04-2006 01:02 pm |
|
2nd Post |
|
Dave Sollish Member
|
I have had good luck making a custom seal for that area using silicone RTV. I first covered the top of the door window and windshield with plastic wrap. Then I packed the silicone into the area of the soft top that makes contact with the window/windshield. I used black silicone as my top is also black. Lock the top down as normal, smooth the silicone squeeze out (like you were caulking a tub) and let cure. Note: when you smooth out the silicone that you need to leave clearance to open the door with the top on so no overhang on the outside of the door. When cured open top, peel away the plastic wrap and you're done!
|
|||||||||||||
| ||||||||||||||
| Current time is 10:58 am | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > Soft Top Water Leaks | Top |
