| ||||
| ||||
| Moderated by: Greg Fletcher | Page:   1 2 |
|
|||||||||||||
| Sills - molding and paint | Rating: 
|
| Author | Post |
|---|
| Posted: 02-18-2006 04:01 pm |
|
21st Post |
|
Mark Rosenbaum Member 
|
Here's a photo of what's on my car. The photo is of the left side, forward wheel well. Attachment: sill molding.JPG (Downloaded 56 times)
|
||||||||||||||
| |||||||||||||||
| Posted: 02-18-2006 06:12 pm |
|
22nd Post |
|
overdoer Member
|
My 72, 73, both 74's had the black molding sandwiched between the chrome with the strip ending to form a point at each end of the car. I have even sold sets of this that I removed from parts cars. The 73 has a chrome looking strip of the same shape but is solid and not a sandwiched design just below the door. I have seen a few cars come with this strip below the doors and many with the trim in the center of the doors and fenders. Marck
|
|||||||||||||
| ||||||||||||||
| Posted: 02-18-2006 06:34 pm |
|
23rd Post |
|
Jim Sohl Member
|
My '73, sn11210, came to me as a repo from Cook County (Chicago) Ill. I am apparently the second, or at most, the third owner. Anyway, 11210 had no trim on the sides or sills. No undercoating on the sills, no snaps to hold the top/cover down, a crashed 4-speed and seriously folks, a bullet hole in the front right quarter about mid-way between the 'J' crest and the top of the quarter. Original color was 'mustard' with two different reds over the original.
|
||||||||||||||
| |||||||||||||||
| Posted: 02-18-2006 06:52 pm |
|
24th Post |
|
Tifosi Member
|
Jim - was that bullet hole OEM? Line worker at the plant must have had a bad day :) Matt
|
|||||||||||||
| ||||||||||||||
| Posted: 02-19-2006 04:46 pm |
|
25th Post |
|
Jim Sohl Member
|
Well,, let's see. I doubt 11210 shipped that way, so,, dealer installation or normal wear and tear? If the bullet hole was part of the repo effort, is that wear and tear or a financial incentive? You decide.
|
||||||||||||||
| |||||||||||||||
| Posted: 02-19-2006 04:49 pm |
|
26th Post |
|
Mark Rosenbaum Member
|
I used to have a 1956 Dodge pickup truck with two .30 caliber rifle bullet holes in the side of the bed. I always thought they added character to the beast. Rather than fixing them, I just painted the truck in a very effective camouflage pattern.
|
|||||||||||||
| ||||||||||||||
| Current time is 05:34 pm | Page: 1 2 |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > Sills - molding and paint | Top |
