| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Rust Conditioning products | Rate Topic |
| Author | Post |
|---|
| Posted: 08-15-2005 08:10 pm |
|
1st Post |
|
Jay Member 
|
I have scraped the rust scale from my floorboards. I have just a few small holes. I was considering brazing them closed and then using some kind of "over rust" coating. I have seen the reference to POR-15 and Zero Rust. A local paint shop in my area has a product called "Chassis Saver" from Magnet Paints. Has anyone used this product? If so, What is your opinion as to which product is better. Any and all advise is welcome.
|
||||||||||||||
| |||||||||||||||
| Posted: 08-16-2005 03:07 am |
|
2nd Post |
|
Art DeKneef Member
|
First, I'm not familiar with the product "Chassis Saver". I have used both POR-15 and Zero Rust and prefer the Zero Rust product. I also use a product called Picklex 20 before I put on the Zero Rust. The combination works great in preventing rust.
|
|||||||||||||
| ||||||||||||||
| Posted: 08-17-2005 01:51 pm |
|
3rd Post |
|
George Member
|
I'd also be interested in people's opinion on this. I have used POR 15 too, but like the idea of the spray can for small parts with the Zero Rust. I think Eastwood has a product too, maybe Chassis Saver? I haven't been in the restoration hobby long enough to have results from any field tests! Any thoughts out there? Thanks
|
||||||||||||||
| |||||||||||||||
| Posted: 08-17-2005 03:29 pm |
|
4th Post |
|
Jay Member
|
I checked the Eastwood web site. They have a reprint of an artical from AUTO RESTORER, November 2003, that compares "Rust Encapsulator" to "POR-15" Upon reading the artical, I decided to try the " Eastwood Rust Encapsulator Red " product on my floorboards. Here is a link to their web site. http://www.eastwoodco.com/
|
|||||||||||||
| ||||||||||||||
| Current time is 07:24 am | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > Rust Conditioning products | Top |
