| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| GT Chrome Hood Knob | Rate Topic |
| Author | Post |
|---|
| Posted: 05-04-2020 09:04 pm |
|
1st Post |
|
NigelK Member
|
I've seen several photos showing a small chrome knob on the hood of LHD GTs, located just behind the windscreen washer jet. This knob is not present on RHD GTs (certainly not on mine). Just out of curiosity, does anyone know what the chrome knob does? Attachment: GG GT hood topside.jpg (Downloaded 76 times)
|
||||||||||||||
| |||||||||||||||
| Posted: 05-04-2020 09:05 pm |
|
2nd Post |
|
NigelK Member
|
And the view of the knob from under the hood Attachment: GG GT hood underside.jpg (Downloaded 76 times)
|
|||||||||||||
| ||||||||||||||
| Posted: 05-06-2020 07:49 pm |
|
3rd Post |
|
gmgiltd Member
|
Hi Nigel, I have it on mine but it's in front of the windscreen washer - does not seem to do anything it's just bolted through. Perhaps an alternative position for the jet? Gordon
|
||||||||||||||
| |||||||||||||||
| Posted: 05-07-2020 01:08 am |
|
4th Post |
|
Esprit2 Member
|
Just a guess, but perhaps it's there to create a little turbulence in the slipstream to help disperse the spray from the windscreen washer jet. Regards, Tim Engel
|
|||||||||||||
| ||||||||||||||
| Posted: 05-07-2020 02:55 am |
|
5th Post |
|
Frank Schwartz Member
|
I think the JH hood had a hole there for the squirter. Since the GT had the squirter moved more forwards, that chrome button merely sealed the original JH hole.....both cars used the same hood, you see. Frank
|
||||||||||||||
| |||||||||||||||
| Posted: 05-07-2020 02:55 am |
|
6th Post |
|
Frank Schwartz Member
|
I think the JH hood had a hole there for the squirter. Since the GT had the squirter moved more forwards, that chrome button merely sealed the original JH hole.....both cars used the same hood, you see. Frank
|
|||||||||||||
| ||||||||||||||
| Posted: 05-07-2020 02:29 pm |
|
7th Post |
|
NigelK Member
|
My GT only has one hole in the bonnet. Maybe it’s a replacement J-H bonnet or maybe the chrome knob only appeared on later cars (mine is 30071)? I can’t see any reference to the knob in the GT parts book either...
|
||||||||||||||
| |||||||||||||||
| Posted: 05-07-2020 05:28 pm |
|
8th Post |
|
redracer Member
|
Frank's correct; the GT has 2 holes in it: one about 7 1/2" from the edge for the Healey, and the GT a little farther forward. The "cheap"/easy fix was to put the chrome hemisphere where the original nozzle went
|
|||||||||||||
| ||||||||||||||
| Posted: 05-07-2020 06:27 pm |
|
9th Post |
|
NigelK Member
|
I’ve also seen a GT with washer jets in both holes, presumably to increase the amount of water that hits the screen. Interesting that most RHD GTs only seem to have one hole - the two hole bonnets seem to be mainly US cars
|
||||||||||||||
| |||||||||||||||
| Posted: 05-18-2020 02:13 am |
|
10th Post |
|
chrisl Member 
|
My RHD GT has only the jet, no second hole or chrome knob. Maybe the wind 'n water swirls a different way depending on which side of the car the driver sits...! That said, I am now curious; when I get home I'll measure the distance from the windscreen of my J-H and the GT and see if there's any difference.
|
|||||||||||||
| ||||||||||||||
| Posted: 05-18-2020 01:06 pm |
|
11th Post |
|
chrisl Member
|
Well, just measured them both - there is no difference in the position between my early-ish J-H Mk1 and my GT (which is 30305). They are both 19cm (7 1/2" on the old Imperial scale) from the edge of the bonnet (hood :) ). Nor is there any sign of a hole that might have been filled on either...
|
||||||||||||||
| |||||||||||||||
| Posted: 02-09-2023 06:59 pm |
|
12th Post |
|
Jensen GT Member 
|
My LHD US GT has 2 holes..... Attachment: GT122111.jpg (Downloaded 20 times)
|
|||||||||||||
| ||||||||||||||
| Current time is 06:23 am | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > GT Chrome Hood Knob | Top |
