| ||||
Moderated by: Greg Fletcher |
|
JH Mk1 Headlamp Panel issue | Rate Topic |
Author | Post |
---|
Posted: 03-23-2019 12:43 pm |
|
1st Post |
JHPSow Member
|
Hi All, My JH Mk1 bare metal rebuild continues, now into year 3! Panel work coming to an end, but Im having trouble remembering how the headlamp panels are aligned. Do you have a photo of your JH with the GRP Headlamp cowl removed, showing the metal panel fit? If yes, please can you upload into this post? My rusty damaged headlamp panels were removed 3 years ago. I have purrchased 2x new headlamp panels & and 2x adjacent "headlamp pane" (triangular) panels. Two issues: 1. The headlamp panel can be fitted with the edge flanges pointing forward (I think this position is correct) and pointing backwards. Having looked online I found pictures of JH's with both set ups. Looking at the Martin Robey (MR) panel images on their website: https://www.martinrobey.com/jensen-healey/interactive-parts/diagrams/88/body/ Flange looks to be pointing forward. When asked, MR were unable to confirm correct position. Suggestions? 2. The new headlamp panel doesnt align to the Inner Wing , circa. 1" gap. Please see photo showing gap. MR advised fettling to achieve "best fit". Suggestions? See photo attachement for gaps etc Attachment: JH-Headlamp-Panelv4.jpg (Downloaded 65 times)
|
||||||||||||||
|
Posted: 03-27-2019 04:36 pm |
|
2nd Post |
noomg Member
|
JHPSow, I've just reassembled my J-H after painting, my headlamp panel flanges face forward. There shouldn't be a gap a between the two panels, it looks like the inner wing panel needs to be rounded a bit to match the shape of the headlight bucket. It looks like a little metalwork will be required. Hey, if it was easy everyone would be driving a J-H, LOL.
|
|||||||||||||
|
Posted: 03-28-2019 09:29 pm |
|
3rd Post |
JHPSow Member
|
Hey noomg, Thank you for your reply, we had a long hard look at the situ, another cup of tea, and came to the same decision. Hlamp panel flange forward, panel work to inner wing. Now a good fit. Stone chip just applied to new floors, sills, chassis legs, etc, etc
|
||||||||||||||
|
Posted: 03-30-2019 04:54 pm |
|
4th Post |
noomg Member
|
Well there's the problem, if you'd had another Guinness instead of a cup of tea, the answer would have revealed itself.
|
|||||||||||||
|
Current time is 07:54 pm | |
> Jensen Healey & Jensen GT Tech > Body & interior stuff > JH Mk1 Headlamp Panel issue | Top |